| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
FXLS93421 bảng dữ liệu(PDF) 51 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
FXLS93421 bảng dữ liệu(HTML) 51 Page - NXP Semiconductors |
|
51 / 254 page ![]() NXP Semiconductors FXLS9xxxx Dual channel inertial sensor 11.2.5 Temperature register (TEMPERATURE) The temperature register is a read-only register which provides a temperature value from the channel 0 temperature sensor. The temperature value is specified in Section 10.5. Note, the device is only guaranteed to operate within the temperature limits specified in Section 10. This includes the performance of the temperature register values. This register is readable in DSI3 mode, SPI mode, I2C mode or PSI5 Programming Mode. Location Bit Address Register 7 6 5 4 3 2 1 0 $0E TEMPE RATURE TEMP[7:0] Reset Value 0 0 0 0 0 0 0 0 Table 74. Temperature register (TEMPERATURE) 11.2.6 Device lock register (DEVLOCK_WR) The device lock register is a user programmed read/write register which contains the ENDINIT bit and reset control bits. This register is readable and writable in DSI3 mode, SPI mode, I2C mode or PSI5 Programming Mode. Location Bit Address Register 7 6 5 4 3 2 1 0 $10 DEVLOCK_WR ENDINIT RESERVED RESERVED RESERVED SUP_ERR_DIS RESERVED RESET[1:0] Reset Value 0 0 0 0 0 0 0 0 Table 75. Device lock register (DEVLOCK_WR) 11.2.6.1 End initialization bit (ENDINIT) The ENDINIT bit is a control bit used to indicate that the user has completed all device and system level initialization tests. Once the ENDINIT bit is set, writes to all writable register bits are inhibited except for the DEVLOCK_WR register. Once set, the ENDINIT bit can only be cleared by a device reset. When ENDINIT is set, the following occurs: • An error detection is enabled for all user writable registers. The error detection code is continuously calculated on the user writable registers and verified against a previously calculated error detection code. • The offset cancellation filter is forced to its final stage. • Self-test is disabled and inhibited. • Register Writes are inhibited with the exception of the RESET[1:0] bits in the DEVLOCK_WR register. In DSI3 mode, when the ENDINIT bit is set, the device is forced to PDCM according to the device settings and no longer responds to CRM commands. In PSI5 mode, the ENDINIT bit is automatically set when the device exits Initialization Phase 3. FXLS9xxxx All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved. Product data sheet Rev. 6 — 8 February 2021 51 / 254 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |