HCS08 datasheet(142/374 Pages) NXP

142 / 374 page

Analog-to-Digital Converter (S08ADC12V1)

MC9S08JM60 Series Data Sheet, Rev. 5

142

Freescale Semiconductor

If the MODE bits are changed, any data in ADCRH becomes invalid.

10.3.4

Data Result Low Register (ADCRL)

ADCRL contains the lower eight bits of the result of a 12-bit or 10-bit conversion, and all eight bits of an

8-bit conversion. This register is updated each time a conversion completes except when automatic

compare is enabled and the compare condition is not met. In 12-bit and 10-bit mode, reading ADCRH

prevents the ADC from transferring subsequent conversion results into the result registers until ADCRL

is read. If ADCRL is not read until the after next conversion is completed, the intermediate conversion

results are lost. In 8-bit mode, there is no interlocking with ADCRH. If the MODE bits are changed, any

data in ADCRL becomes invalid.

10.3.5

Compare Value High Register (ADCCVH)

In 12-bit mode, the ADCCVH register holds the upper four bits of the 12-bit compare value. When the

compare function is enabled, these bits are compared to the upper four bits of the result following a

conversion in 12-bit mode.

ADR11

ADR10

ADR9

ADR8

Reset:

Figure 10-5. Data Result High Register (ADCRH)

ADR7

ADR6

ADR5

ADR4

ADR3

ADR2

ADR1

ADR0

Reset:

Figure 10-6. Data Result Low Register (ADCRL)

ADCV11

ADCV10

ADCV9

ADCV8

Reset:

Figure 10-7. Compare Value High Register (ADCCVH)

HCS08 bảng dữ liệu(PDF) 142 Page - NXP Semiconductors