HCS08 datasheet(89/316 Pages) NXP

89 / 316 page

Chapter 6 Parallel Input/Output Control

MC9S08SG8 MCU Series Data Sheet, Rev. 8

Freescale Semiconductor

6.6.3.3

Port C Pull Enable Register (PTCPE)

6.6.3.4

Port C Slew Rate Enable Register (PTCSE)

321

000

PTCPE3

PTCPE2

PTCPE1

PTCPE0

Reset:

000

Figure 6-21. Internal Pull Enable for Port C Register (PTCPE)

Table 6-20. PTCPE Register Field Descriptions

Field

Description

3:0

PTCPE[3:0]

Internal Pull Enable for Port C Bits — Each of these control bits determines if the internal pull-up device is

enabled for the associated PTC pin. For port C pins that are configured as outputs, these bits have no effect and

the internal pull devices are disabled.

0 Internal pull-up device disabled for port C bit n.

1 Internal pull-up device enabled for port C bit n.

321

000

PTCSE3

PTCSE2

PTCSE1

PTCSE0

Reset:

000

Figure 6-22. Slew Rate Enable for Port C Register (PTCSE)

Table 6-21. PTCSE Register Field Descriptions

Field

Description

3:0

PTCSE[3:0]

Output Slew Rate Enable for Port C Bits — Each of these control bits determines if the output slew rate control

is enabled for the associated PTC pin. For port C pins that are configured as inputs, these bits have no effect.

0 Output slew rate control disabled for port C bit n.

1 Output slew rate control enabled for port C bit n.

HCS08 bảng dữ liệu(PDF) 89 Page - NXP Semiconductors

HCS08 bảng dữ liệu(HTML) 89 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL