HCS08 datasheet(83/316 Pages) NXP

83 / 316 page

Chapter 6 Parallel Input/Output Control

MC9S08SG8 MCU Series Data Sheet, Rev. 8

Freescale Semiconductor

6.6.1.7

Port A Interrupt Pin Select Register (PTAPS)

6.6.1.8

Port A Interrupt Edge Select Register (PTAES)

321

000

PTAPS3

PTAPS2

PTAPS1

PTAPS0

Reset:

000

Figure 6-9. Port A Interrupt Pin Select Register (PTAPS)

Table 6-8. PTAPS Register Field Descriptions

Field

Description

3:0

PTAPS[3:0]

Port A Interrupt Pin Selects — Each of the PTAPSn bits enable the corresponding port A interrupt pin.

0 Pin not enabled as interrupt.

1 Pin enabled as interrupt.

321

000

PTAES3

PTAES2

PTAES1

PTAES0

Reset:

000

Figure 6-10. Port A Edge Select Register (PTAES)

Table 6-9. PTAES Register Field Descriptions

Field

Description

3:0

PTAES[3:0]

Port A Edge Selects — Each of the PTAESn bits serves a dual purpose by selecting the polarity of the active

interrupt edge as well as selecting a pull-up or pull-down device if enabled.

0 A pull-up device is connected to the associated pin and detects falling edge/low level for interrupt generation.

1 A pull-down device is connected to the associated pin and detects rising edge/high level for interrupt

generation.

HCS08 bảng dữ liệu(PDF) 83 Page - NXP Semiconductors

HCS08 bảng dữ liệu(HTML) 83 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL