HCS08 datasheet(61/316 Pages) NXP

61 / 316 page

MC9S08SG8 MCU Series Data Sheet, Rev. 8

Freescale Semiconductor

Chapter 5



Resets, Interrupts, and General System Control

5.1

Introduction

This section discusses basic reset and interrupt mechanisms and the various sources of reset and interrupt

in the MC9S08SG8. Some interrupt sources from peripheral modules are discussed in greater detail within

other sections of this data sheet. This section gathers basic information about all reset and interrupt sources

in one place for easy reference. A few reset and interrupt sources, including the computer operating

properly (COP) watchdog are not part of on-chip peripheral systems with their own chapters.

5.2

Features

Reset and interrupt features include:

•

Multiple sources of reset for flexible system configuration and reliable operation

•

Reset status register (SRS) to indicate source of most recent reset

•

Separate interrupt vector for each module (reduces polling overhead) (see Table 5-2)

5.3

MCU Reset

Resetting the MCU provides a way to start processing from a known set of initial conditions. During reset,

most control and status registers are forced to initial values and the program counter is loaded from the

reset vector (0xFFFE:0xFFFF). On-chip peripheral modules are disabled and I/O pins are initially

configured as general-purpose high-impedance inputs with pull-up devices disabled. The I bit in the

condition code register (CCR) is set to block maskable interrupts so the user program has a chance to

initialize the stack pointer (SP) and system control settings. SP is forced to 0x00FF at reset.

The MC9S08SG8 has the following sources for reset:

•

Power-on reset (POR)

•

External pin reset (PIN)

•

Low-voltage detect (LVD)

•

Computer operating properly (COP) timer

•

Illegal opcode detect (ILOP)

•

Illegal address detect (ILAD)

•

Background debug forced reset

Each of these sources, with the exception of the background debug forced reset, has an associated bit in

the system reset status register (SRS).

HCS08 bảng dữ liệu(PDF) 61 Page - NXP Semiconductors

HCS08 bảng dữ liệu(HTML) 61 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL