| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
98ASH70029A bảng dữ liệu(PDF) 33 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
98ASH70029A bảng dữ liệu(HTML) 33 Page - NXP Semiconductors |
|
33 / 60 page ![]() Table 11. Current Consumption (mA) (continued) Mode Maximum Frequency Conditions Typical at 3.3 V, 25°C Maximum at 3.6 V, 105°C IDD1 IDDA IDD1 IDDA • Relaxation Oscillator on • PLL powered on • Continuous MAC instructions with fetches from Program Flash • All peripheral modules enabled. TMRs and SCIs using 1X peripheral clock • ADC/all 6-bit DACs) powered on and clocked • Comparator powered on RUN2 50 MHz • 50 MHz Core and Peripheral clock • Regulators are in full regulation • Relaxation Oscillator on • PLL powered on • Continuous MAC instructions with fetches from Program Flash • All peripheral modules enabled. TMRs and SCIs using 1X peripheral clock • ADC/all 6-bit DACs) powered on and clocked • Comparator powered on 27.6 9.9 43.5 13.2 WAIT 50 MHz • 50 MHz Core and Peripheral clock • Regulators are in full regulation • Relaxation Oscillator on • PLL powered on • Processor Core in WAIT state • All Peripheral modules enabled. • TMRs and SCIs using 1X Clock • ADC/all 6-bit DACs), Comparator powered off 24.0 — 41.3 — STOP 4 MHz • 4 MHz Device Clock • Regulators are in full regulation • Relaxation Oscillator on • PLL powered off • Processor Core in STOP state • All peripheral module and core clocks are off • ADC/Comparator powered off 6.3 — 19.4 — LPRUN (LsRUN) 2 MHz • 200 kHz Device Clock from Relaxation Oscillator's (ROSC) low speed clock • ROSC in standby mode • Regulators are in standby • PLL disabled • Repeat NOP instructions • All peripheral modules enabled, except cyclic ADCs. all 6- bit DACs enabled. • Simple loop with running from platform instruction buffer 2.8 3.1 11.1 4.0 LPWAIT (LsWAIT) 2 MHz • 200 kHz Device Clock from Relaxation Oscillator's (ROSC) low speed clock • ROSC in standby mode • Regulators are in standby • PLL disabled • All peripheral modules enabled, except cyclic ADCs. all 6- bit DACs enabled.1 • Processor core in wait mode 2.7 3.1 11.1 4.0 Table continues on the next page... General MC56F826xx, Rev. 0, 08/2018 NXP Semiconductors 33 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |