TMS320DM355CZCEA13 datasheet(136/163 Pages) TI1

136 / 163 page

TMS320DM355

SPRS463G – SEPTEMBER 2007 – REVISED JUNE 2010

www.ti.com

5.11

Universal Asynchronous Receiver/Transmitter (UART)

The DM355 contains 3 separate UART modules (1 with hardware flow control). These modules performs

serial-to-parallel conversion on data received from a peripheral device or modem, and parallel-to-serial

conversion on data received from the CPU. Each UART also includes a programmable baud rate

generator capable of dividing the 24MHz reference clock by divisors from 1 to 65,535 to produce a 16 x

clock driving the internal logic. The UART modules support the following features:

•

Frequency pre-scale values from 1 to 65,535 to generate appropriate baud rates

•

16-byte storage space for both the transmitter and receiver FIFOs

•

Unique interrupts, one for each UART

•

Unique EDMA events, both received and transmitted data for each UART

•

1, 4, 8, or 14 byte selectable receiver FIFO trigger level for autoflow control and DMA

•

Programmable auto-rts and auto-cts for autoflow control (supported on UART2)

•

Programmable serial data formats

–

5, 6, 7, or 8-bit characters

–

Even, odd, or no parity bit generation and detection

–

1, 1.5, or 2 stop bit generation

•

False start bit detection

•

Line break generation and detection

•

Internal diagnostic capabilities

–

Loopback controls for communications link fault isolation

–

Break, parity, overrun, and framing error simulation

•

Modem control functions: CTS, RTS (supported on UART2)

5.11.1 UART Electrical Data/Timing

Table 5-26. Timing Requirements for UARTx Receive (see Figure 5-35)

DM355

NO.

PARAMETER

UNIT

MIN

MAX

tw(URXDB)

Pulse duration, receive data bit (RXDn)

0.99U(1)

1.05U(1)

tw(URXSB)

Pulse duration, receive start bit

0.99U(1)

1.05U(1)

(1)

U = UART baud time = 1/programmed baud rate.

Table 5-27. Switching Characteristics Over Recommended Operating Conditions for UARTx Transmit

(see Figure 5-35)

DM355

NO.

PARAMETER

UNIT

MIN

MAX

UART0/1 Maximum programmable baud rate

1.5

f(baud)

MHz

UART2 Maximum programmable baud rate

tw(UTXDB)

Pulse duration, transmit data bit (TXDn)

U - 2(1)

U + 2(1)

tw(UTXSB)

Pulse duration, transmit start bit

U - 2(1)

U + 2(1)

(1)

U = UART baud time = 1/programmed baud rate.

136

DM355 Peripheral Information and Electrical Specifications

Submit Documentation Feedback

Product Folder Link(s): TMS320DM355

TMS320DM355CZCEA13 bảng dữ liệu(PDF) 136 Page - Texas Instruments

TMS320DM355CZCEA13 bảng dữ liệu(HTML) 136 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL