| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
RM0352 bảng dữ liệu(PDF) 55 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
RM0352 bảng dữ liệu(HTML) 55 Page - STMicroelectronics |
|
55 / 138 page ![]() DocID024647 Rev 1 55/138 RM0352 ARM© dual timer module (SP804) 137 new load value and uses this new load value for each subsequent reload for as long as the timer is enabled in periodic mode. If the counter is disabled by clearing the TimerEn bit in the TimerControl register, the counter halts and holds its current value. If the counter is re-enabled again then the counter continues decrementing from the current value. One-shot mode One-shot timer mode is selected by setting the OneShot bit in the TimerControl register to 1. The TimerMode bit has no effect in one-shot mode. The 32-bit or 16-bit counter operation is selected by setting the TimerSize bit appropriately in the TimerControl register. To initiate a count down sequence in one-shot mode, write a new load value to the TimerXLoad register and the counter starts decrementing from this value if enabled. In 32-bit mode, the full 32-bits of the counter are decremented and when the count reaches zero, 0x00000000, an interrupt is generated and the counter halts. In 16-bit mode, only the least significant 16-bits of the counter are decremented and when the count reaches 0x0000, an interrupt is generated and the counter halts. One-shot mode can be retriggered by writing a new value to the TimerXLoad register. The counter values change to the new load value on the next TIMCLK when TIMCLKENX is HIGH. Interrupt behavior An interrupt is generated if IntEnable = 1 and the counter reaches 0x00000000 in 32-bit mode or 0xXXXX0000 in 16-bit mode. The most significant 16 bits of the counter are ignored in 16-bit mode. When the Timer module raises an interrupt by asserting TIMINTX, the timing of this signal is generated from a rising clock edge of TIMCLK enabled by TIMCLKENX. When the interrupt is cleared by a write to the interrupt clear register, TimerXIntClr, the TIMINTX signal is deasserted immediately in the PCLK domain rather than waiting for the next enabled TIMCLK rising edge. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |