| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
SH89F52P/044PR bảng dữ liệu(PDF) 82 Page - SINOWEALTH Electronic Ltd |
|
|
|||||||||||||||||||||||||||||
SH89F52P/044PR bảng dữ liệu(HTML) 82 Page - SINOWEALTH Electronic Ltd |
|
82 / 105 page ![]() SH88F516(SH88F54/SH89F52) 82 Table 9.17 ADC Channel Configure Register 95H Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 ADCH CH7 CH6 CH5 CH4 CH3 CH2 CH1 CH0 R/W R/W R/W R/W R/W R/W R/W R/W R/W Reset Value (POR/WDT/LVR/PIN)) 0 0 0 0 0 0 0 0 Bit Number Bit Mnemonic Description 7-0 CH[7:0] Channel Configuration bits 0: P0.x (x = 0 - 7) are I/O port or other function 1: P0.x (x = 0 - 7) are ADC input port (When P0x isn’t configured as other function) Table 9.18 AD Converter Data Register (Compare Value Register) 96H Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 ADDL - - - - - - A1 A0 R/W - - - - - - R/W R/W Reset Value (POR/WDT/LVR/PIN) - - - - - - 0 0 97H Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 ADDH A9 A8 A7 A6 A5 A4 A3 A2 R/W R/W R/W R/W R/W R/W R/W R/W R/W Reset Value (POR/WDT/LVR/PIN) 0 0 0 0 0 0 0 0 Bit Number Bit Mnemonic Description 1-0 7-0 A9-A0 ADC Data register Digital Value of sampled analog voltage, updated when conversion is completed If ADC Compare function is enabled (EC = 1), the value will be compared with the analog input The Approach for AD Conversion: (1) Select the analog input channels and reference voltage. (2) Enable the ADC module with the selected analog channel. (3) Set GO/DONE ———— = 1 to start the AD conversion. (4) Wait until GO/DONE ———— = 0 or ADCIF = 1, if the ADC interrupt is enabled, the ADC interrupt will occur, user need clear ADCIF by software. (5) Acquire the converted data from ADDH/ADDL. (6) Repeat step 3-5 if another conversion is required. The Approach for Digital Compare Function: (1) Select the analog input channels and reference voltage. (2) Write ADDH/ADDL to set the compare value. (3) Set EC = 1 to enable compare function. (4) Enable the ADC module with the selected analog channel. (5) Set GO/DONE ———— = 1 to start the compare function. (6) If the analog input is lager than compare value set in ADDH/ADDL, the ADCIF will be set to 1. If the ADC interrupt is enabled, the ADC interrupt will occur, user need clear ADCIF by software. (7) The compare function will continue work until the GO/DONE ———— bit is cleared to 0. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |