| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MT9075B bảng dữ liệu(PDF) 46 Page - Mitel Networks Corporation |
|
|
|||||||||||||||||||||||||||||
MT9075B bảng dữ liệu(HTML) 46 Page - Mitel Networks Corporation |
|
46 / 78 page ![]() MT9075B Preliminary Information 46 Table 44 - Jitter Attenuator Status Word (Page 03H, Address 17H) Bit Name Functional Description 7 - 0 RxEBC7 -0 Receive Eighth Bit Count. The 8 least significant bit of a counter that indicates the number of one eighth bit times there are between the ST-BUS frame pulse and receive frame pulse (RxFP).The accuracy of the this measurement is approximately + 1/16 (one sixteenth) of a bit. Table 43 - Least Significant Phase Status Word (Page 03H, Address 16H) Bit Name Functional Description 7 JACS Jitter Attenuated Clock Slow. If one it indicates that the dejittered clock period is increased by 1/16 UI. If zero the clock is at normal speed. 6 JACF Jitter Attenuated Clock Fast. If one it indicates that the dejittered clock period is decreased by 1/16 UI. If zero the clock is at normal speed. 5 JAE Jitter Attenuator FIFO Empty. If one it indicates that the JA FIFO is empty. 4 JAF4 Jitter Attenuator FIFO with 4 Full Locations. If one it indicates that the JA FIFO has at least 4 full locations. 3 JAFC Jitter Attenuator Center Full. If one it indicates that the JA FIFO is at least half full. 2 JAE4 Jitter Attenuator FIFO with 4 Empty Locations. If one it indicates that the JA FIFO has at most 4 empty locations. 1 JAF Jitter Attenuator FIFO Full. If one it indicates that the JA FIFO is full. 0 --- Unused Bit Name Functional Description 7LL Long Loop. This bit is one when the line signal has an amplitude so attenuated as to require substantial equalization for data recovery. 6ML Medium Loop. This bit is one when the line signal has an amplitude so attenuated as to require some equalization for data recovery. 5SL Short Loop. This bit is one when the line signal has an amplitude with minimal attenuation. 4 LLOS LIU Loss of Signal Indication. This bit will be one when the received signal amplitude is more than 20 dB below the nominal value for a period of at least 1 msec. This bit will be zero for normal operation. 3-0 --- Unused Table 45 - Receive Signal Status Word (Page 03H, Address 18H) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |