| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TBD bảng dữ liệu(PDF) 66 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
TBD bảng dữ liệu(HTML) 66 Page - Freescale Semiconductor, Inc |
|
66 / 80 page ![]() MSC8144E Quad Core Digital Signal Processor Data Sheet, Rev. 6 Hardware Design Considerations Freescale Semiconductor 66 3.4 Connectivity Guidelines Note: Although the package actually uses a ball grid array, the more conventional term pin is used to denote signal connections in this discussion. First, select the pin multiplexing mode to allocate the required I/O signals. Then use the guidelines presented in the following subsections for board design and connections. The following conventions are used in describing the connectivity requirements: 1. GND indicates using a 10 k Ω pull-down resistor (recommended) or a direct connection to the ground plane. Direct connections to the ground plane may yield DC current up to 50mA through the I/O supply that adds to overall power consumption. 2. VDD indicates using a 10 kΩ pull-up resistor (recommended) or a direct connection to the appropriate power supply. Direct connections to the supply may yield DC current up to 50mA through the I/O supply that adds to overall power consumption. 3. Mandatory use of a pull-up or pull-down resistor it is clearly indicated as “pull-up/pull-down”. 4. NC indicates “not connected” and means do not connect anything to the pin. 5. The phrase “in use” indicates a typical pin connection for the required function. Note: Please see recommendations #1 and #2 as mandatory pull-down or pull-up connection for unused pins in case of subset interface connection. 3.4.1 DDR Memory Related Pins This section discusses the various scenarios that can be used with DDR1 and DDR2 memory. Note: For information about unused differential/non-differential pins in DDR1/DDR2 modes (that is, unused negative lines of strobes in DDR1), please refer to Table 56. 3.4.1.1 DDR Interface Is Not Used Table 56. Connectivity of DDR Related Pins When the DDR Interface Is Not Used Signal Name Pin Connection MDQ[0–31] NC MDQS[0–3] NC MDQS[0–3] NC MA[0–15] NC MCK[0–2] NC MCK[0–2] NC MCS[0–1] NC MDM[0–3] NC MBA[0–2] NC MCAS NC MCKE[0–1] NC MODT[0–1] NC MDIC[0–1] NC MRAS NC MWE NC MECC[0–7] NC ECC_MDM NC |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |