APEX20KC datasheet(10/90 Pages) ALTERA

10 / 90 page

Altera Corporation

APEX 20KC Programmable Logic Device Data Sheet

Figure 3. LAB Structure

Each LAB contains dedicated logic for driving control signals to its LEs

and ESBs. The control signals include clock, clock enable, asynchronous

clear, asynchronous preset, asynchronous load, synchronous clear, and

synchronous load signals. A maximum of six control signals can be used

at a time. Although synchronous load and clear signals are generally used

when implementing counters, they can also be used with other functions.

Each LAB can use two clocks and two clock enable signals. Each LAB’s

clock and clock enable signals are linked (e.g., any LE in a particular LAB

using CLK1 will also use CLKENA1). LEs with the same clock but different

clock enable signals either use both clock signals in one LAB or are placed

into separate LABs.

If both the rising and falling edges of a clock are used in a LAB, both LAB-

wide clock signals are used.

To/From

Adjacent LAB,

ESB, or IOEs

To/From

Adjacent LAB,

ESB, or IOEs

The 10 LEs in the LAB are driven by

two local interconnect areas. These LEs

can drive two local interconnect areas.

Local Interconnect

LEs drive local,

MegaLAB, row,

and column

interconnects.

Column

Interconnect

Row

Interconnect

MegaLAB Interconnect

APEX20KC bảng dữ liệu(PDF) 10 Page - Altera Corporation