| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
GMS30004 bảng dữ liệu(PDF) 72 Page - Hynix Semiconductor |
|
|
|||||||||||||||||||||||||||||
GMS30004 bảng dữ liệu(HTML) 72 Page - Hynix Semiconductor |
|
72 / 158 page ![]() 5 - 18 6.3 Description of Commands The symbols used in this chapter are defined as in below. 1) XXXX Indicates input from the keyboard. 2) ã Indicates Return key. 3) _ Indicates insertion of space characters. 4) In Indicates range. 5) [ ] Indicates it is omittable. 6) No. used on this system are hexadecimal. However, the machine cycles are decimal. (Common items on this simulator) 1) This simulator accepts up to 132 characters per each line. Before pressing ` ã` key, data can be modified in the following procedure. <BS> Key deletes one character and the cursor sets back by one character. 2) Commands can be input both in block and small letters and both are treated as the same. 3) Commands can be terminated by inputting `.`. 4) Command history (recall) This simulator has 16 command buffers and each time `Control A` is pressed, command immediately before the current one is displayed. 5) When `!XX` is executed to `*`, MS-DOS* commands can be executed temporarily. 6) Regarding the omission indicated with [ ], when one [<address>] or [In] is omitted, the area may not be recognized. In this case, be careful as the current operation cannot be ensured. 7) When `.XXXX` is specified, it is treated as a symbol. Therefore, before using this specification, specification of Symbol file should have been made. 8) When `ESC` key is pressed, command execution is stopped and the system moves to `*` mode. 9) When In is LXX< XX indicates No. of words and when there is no L, XX indicates an address. 10) For command separator (indicated with_in this Manual), `_` or `,` can be used. 11) When `Control C` is pressed, the system goes back to `MS-DOS*`. 12) In case of both sequential and polynomial address, the first two digits of an <address> indicate No. of page and the latter two digits indicate the address. Hereunder is the explanation on each command used on this system. Chapter 5. Software |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |