AT90SCR100 datasheet(409/433 Pages) ATMEL

409 / 433 page

409

TPR0327AY–SMS–30Jan09

AT90SCR100

31. Electrical Characteristics

31.1

Scope

The AT90SCR100 application can make the use of the internal DC/DC converter or not.

Please pay attention to the configuration of the AT90SCR100 before reading the table, to match

your particular needs.

AT90SCR100 without active DC/DC: Vcc range: 2.4V - 5.5V

AT90SCR100 with active DC/DC: Vcc range: 2.7V - 5.5V

Absolute Maximum Ratings*

Operating Temperature.................................... -40

°C to +85°C

*NOTICE:

Stresses beyond those listed under “Absolute

Maximum Ratings” may cause permanent dam-

age to the device. This is a stress rating only and

functional operation of the device at these or

other conditions beyond those indicated in the

operational sections of this specification is not

implied. Exposure to absolute maximum rating

conditions for extended periods may affect

device reliability.

Storage Temperature ..................................... -65°C to +150°C

Voltage on any Pin except RESET

with respect to Ground ................................-0.5V to VCC+0.5V

Voltage on RESET with respect to Ground......-0.5V to +13.0V

Maximum Operating Voltage ............................................ 6.0V

DC Current

VCC and GND Pins.........................................TBD

All DC Characteristics contained in this datasheet are based on characterization of

other AVR microcontrollers and peripherals.

These values are preliminary values representing design targets, and will be

updated after characterization of silicon

This datasheet is only a preliminary version. All values indicated here are indica-

tive values, describing what the product should achieve.

ALL THESE VALUES ARE TO BE CONFIRMED OR TO BE DEFINED

Caution

AT90SCR100 bảng dữ liệu(PDF) 409 Page - ATMEL Corporation