CLRC63201TSLASH0FE datasheet(74/163 Pages) PHILIPS

74 / 163 page

Philips Semiconductors

Product Specification Rev. 3.0; May 2003

Multiple Protocol Contactless Reader IC

CL RC632

Confidential

6.2

Product Information Field (Read Only)

Byte

Meaning

Product Type Identification

RFU

Product Serial Number

Internal

RsMaxP CRC

Table 6-2: Product Information Field

PRODUCT TYPE IDENTIFICATION:

The CL RC632 is a member of a new family for highly integrated reader IC’s. Each member of the product

family has its unique Product Type Identification. The value of the Product Type Identification is shown in the

table below:

Product Type Identification

Byte

Value

30hex

FFhex

0Fhex

XXhex

Table 6-3: Product Type Identification Definition

Byte 4 indicates the current version number.

PRODUCT SERIAL NUMBER:

The CL RC632 holds a four byte serial number that is unique for each device.

INTERNAL:

These 2 bytes hold internal trimming parameters.

RsMaxP:

Maximum Source Resistance for the p-Channel Driver Transistor of pin TX1 and TX2

The source resistance of the p-channel driver transistors of pin TX1 and TX2 may be adjusted via the value

GsCfgCW in the CWConductance Register (see chapter 13.3). The mean value of the maximum adjustable

source resistance of the pins TX1 and TX2 is stored as an integer value in Ohms in byte RsMaxP.

This value is denoted as maximum adjustable source resistance Rsref,max,p and is measured setting

GsCfgCW in the Register CWConductance to 01hex. It is in the range between about 80 to 120 Ohm.

CRC:

The content of the product information field is secured via a CRC-byte, which is checked during start up.

CLRC63201T/0FE bảng dữ liệu(PDF) 74 Page - NXP Semiconductors