công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

HD64F7065AF bảng dữ liệu(PDF) 72 Page - Renesas Technology Corp

tên linh kiện HD64F7065AF
Giải thích chi tiết về linh kiện  Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7000 Series
PDF  941 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  RENESAS [Renesas Technology Corp]
Trang chủ  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

HD64F7065AF bảng dữ liệu(HTML) 72 Page - Renesas Technology Corp

Back Button HD64F7065AF Datasheet HTML 68Page - Renesas Technology Corp HD64F7065AF Datasheet HTML 69Page - Renesas Technology Corp HD64F7065AF Datasheet HTML 70Page - Renesas Technology Corp HD64F7065AF Datasheet HTML 71Page - Renesas Technology Corp HD64F7065AF Datasheet HTML 72Page - Renesas Technology Corp HD64F7065AF Datasheet HTML 73Page - Renesas Technology Corp HD64F7065AF Datasheet HTML 74Page - Renesas Technology Corp HD64F7065AF Datasheet HTML 75Page - Renesas Technology Corp HD64F7065AF Datasheet HTML 76Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 72 / 941 page
background image
Section 2 CPU
Rev. 5.00 Sep 11, 2006 page 50 of 916
REJ09B0332-0500
ALU
R8[Is]
R4[As]
R5[As]
+2/+4 (INC)
+0 (no update)
R3[As]
R2[As]
–2/–4 (DEC)
31
31
0
31
0
0
MAB
IAB
Post-updating
Pre-updating
Note: Four address processing methods:
1. No update
2. Index register addition (Is)
3. Increment
4. Decrement
Figure 2.10 Single Data Transfer Addressing
Modulo Addressing
Like other DSPs, the SH7065 has a modulo addressing mode. Address registers are updated in the
same way in this mode. When the address pointer value reaches the preset modulo end address, the
address pointer value becomes the modulo start address.
Modulo addressing is only available for the X and Y data transfer instructions (MOVX.W,
MOVY.W). Modulo addressing mode is specified for the X address register by setting the DMX
bit in the SR register, and for the Y address register by setting the DMY bit. Modulo addressing is
valid for either the X or the Y address register, only; it cannot be set for both at the same time.
Therefore, DMX and DMY cannot both be set simultaneously (if they are, the DMY setting will
be valid).
The MOD register is provided to set the start and end addresses of the modulo address area. The
MOD register contains MS (Modulo Start) and ME (Modulo End). An example of the use of the
MOD register (MS and ME fields) is shown below.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com