| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
S32K310 bảng dữ liệu(PDF) 66 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
S32K310 bảng dữ liệu(HTML) 66 Page - NXP Semiconductors |
|
66 / 164 page ![]() Table 24. RUN mode configuration options for S32K389...continued LPI2C[6] All OFF All OFF All OFF All OFF All OFF All OFF All OFF EMAC/ GMAC[7] OFF 2x 1x 1x 1x 1x 1x SAI OFF All OFF All OFF All OFF All OFF All OFF All OFF QSPI OFF All OFF All OFF All OFF All OFF All OFF All OFF eMIOS[8] All OFF All OFF 3x 3x 2x 2x 2x SAR_AD C[9] All OFF 1x 3x 3x 2x 2x 2x LPCMP[1 0] All OFF 1x 1x 1x 1x 1x 1x [1] HSE_B: After start-up, the HSE core is in WFI. [2] Core memories enabled in core CM7_n: D-Cache, I-Cache, D-TCM, I-TCM. [3] • FlexCAN0: Transmitting an 8-byte CAN-FD data frame at 5 Mbps, every 10 ms. • FlexCAN1: Transmitting a 64-byte CAN-FD data frame at 2 Mbps, every 20 ms. • FlexCAN2-11: Transmitting an 8-byte CAN data frame at 500 Kbps, every 20 ms. [4] LPUART0-15: Transmitting at 19200 bps, every 100ms. [5] • LPSPI0: Transmitting 32 bits at 20 Mbps (GPIO Fast pads), every 5 ms. • LPSPI1-5: Transmitting 32 bits at 1 Mbps, every 5 ms. [6] LPI2C0-1: Transmitting 3 bytes at 400 Kbps, every 100ms. [7] EMAC/GMAC: ON for MII interface. [8] • eMIOS0: 6 channels in PWM mode @ 20 KHz. • eMIOS1-2: 8 channels in PWM mode @ 400 Hz. [9] • SAR_ADC0: 16 channels at 400 Hz rate, BCTU triggered. • SAR_ADC1-2: 4 channels at 20 KHz rate, BCTU triggered. [10] LPCMP0: 8 channels enabled; LPCMP1-2: 4 channels enabled. 6.9 Cyclic wake-up current The cyclic wake-up current is the calculated average current consumption during the periodic switching between RUN mode and STANDBY mode. This average current can be calculated with the following formula: ICYCL = RUN Current According to Ratio + STANDBY Current According to Ratio Where the Current According to Ratio value is calculated as follows: Current According to Ratio = Supply Current × Ratio of Duration As an example, the following data was obtained with an application that periodically (every 40ms) alternates between RUN mode, for approximately 200μs to scan several GPIO inputs (51 GPIOS), and spends the rest of the time in STANDBY mode. NXP Semiconductors S32K3XX S32K3xx Data Sheet S32K3XX All information provided in this document is subject to legal disclaimers. © 2025 NXP B.V. All rights reserved. Product data sheet Rev. 13 — 12 November 2025 Document feedback 66 / 164 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |