| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMPR4925 bảng dữ liệu(PDF) 189 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMPR4925 bảng dữ liệu(HTML) 189 Page - Toshiba Semiconductor |
|
189 / 590 page ![]() Chapter 8 DMA Controller 8-19 8.3.13 Transfer Stall Detection Function If the period from when a certain channel last performs internal bus access to when the next internal bus access is performed exceeds the Transfer Stall Detection Interval field (STLTIME) of the DMA Channel Control Register (DMCCRn), the Transfer Stall Detection bit (STLXFER) of the DMA Channel Status Register (DMCSRn) is set. An error interrupt is signalled if the Error Interrupt Enable bit (DMCCRn.INTENE) is set. In contrast to other error interrupts, DMA transfer is not stopped. Normal DMA transfer is executed if bus ownership can be obtained. Furthermore, clearing the Transfer Stall Detection (STLXFER) resumes transfer stall detection as well. Setting the Transfer Stall Detection Interval field (STLTIME) to “000” disables the Transfer Stall Detection function. 8.3.14 Arbitration Among DMA Channels The DMA Controller has an on-chip DMA Channel Arbiter that arbitrates bus ownership among four DMA channels that use the internal bus (G-Bus). There are two methods for determining priority: the round robin method and the fixed priority method. (See Figure 8.3.7.) The Round Robin Priority bit (RRPT) of the DMA Master Control Register (DMMCR) selects the priority method. • Fixed priority (DMMCR.RRPT = 0) As shown below, Channel 0 has the highest priority and Channel 3 has the lowest priority. CH0 > CH1 > CH2 > CH3 • Round Robin method (DMMCR.RRPT = 1) The last channel to perform DMA transfer has the lowest priority. • After CH0 DMA transfer execution: CH1 > CH2 > CH3 > CH0 • After CH1 DMA transfer execution: CH2 > CH3 > CH0 > CH1 • After CH2 DMA transfer execution: CH3 > CH0 > CH1 > CH2 • After CH3 DMA transfer execution: CH0 > CH1 > CH2 > CH3 a) Fixed Priority is selected b) Round Robin Priority is selected Figure 8.3.7 DMA Channel Arbitration Channel 0 Channel 1 Channel 2 Channel 3 Channel 0 Channel 2 Channel 1 Channel 3 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |