845GL datasheet(136/193 Pages) INTEL

136 / 193 page

Functional Description

136

Intel® 82845G/82845GL/82845GV GMCH Datasheet

4.6

Power and Thermal Management

4.6.1

Power Management Support Overview

• ACPI Supported

• System States: S0, S1(desktop), S3, S4, S5, C0, C1, C2 (desktop)

• Graphics States: D0, D3

• Monitor States: D0, D1, D2, D3

4.6.2

Processor Power State Control

• C0 (Full On): This is the only state that runs software. All clocks are running, STPCLK# is

deasserted and the processor core is active. The processor can service snoops and maintain

cache coherency in this state.

• C1 (Auto-Halt): The first level of power reduction occurs when the processor executes an

Auto-Halt instruction. This stops the execution of the instruction stream. The processor can

service snoops and maintain cache coherency in this state.

• C2 (Stop Grant): The next level of power reduction occurs when the processor is placed into

the Stop Grant state by the assertion of STPCLK#. The GMCH supports only the Stop Grant

state in C2.

4.6.3

Sleep State Control

• S0 (Awake): In this state all power planes are active.

• S1 (Stop Grant): S1 state is the same as C2 state (Stop Grant).

• S3 (Suspend-To-RAM): The next level of power reduction occurs when the clock synthesizer

and main power planes (ICH4, GMCH, and the processor) are shut down but the DRAM

memory plane and the ICH4 resume well remain active. This is the Suspend-To-RAM (STR)

state. All clocks from the synthesizer are shut down during the S3 state.

• S4 (Suspend-To-Disk) and S5 (Soft Off): The next level of power reduction occurs when the

memory power is shut down in addition to the clock synthesizer, ICH4, GMCH, and the

processor power planes. The ICH4 resume well is still powered.

• G3 (Mechanical Off): In this state only the RTC well is powered. The system can only

reactivate when the power switch is returned to the “on” position.

4.6.4

Graphics Adapter State Control

• D0 (Active): In this state, power planes are normal and active. This is the normal on state for

the GMCH graphics functions. The GMCH graphics functions enter this state out of power-on-

reset.

• D3 (Inactive): The D3 power state is the lowest power mode. Displays are off, and the

registers and memory need not be maintained. HSYNC and VSYNC are not pulsed in this

state.

845GL bảng dữ liệu(PDF) 136 Page - Intel Corporation

845GL bảng dữ liệu(HTML) 136 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL