| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LAN91C111 bảng dữ liệu(PDF) 77 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN91C111 bảng dữ liệu(HTML) 77 Page - Microchip Technology |
|
77 / 125 page ![]() LAN91C111 DS00002276A-page 78 2011-2016 Microchip Technology Inc. 10.2 Typical Flow of Events for Transmit (Auto Release = 0) TABLE 10-2: FLOW OF EVENTS FOR RESTORING DEVICE IN NORMAL POWER MODE S/W Driver Controller Function 1 Write and set (1) the “EPH Power EN” Bit, located in the configuration register, Bank 1 Offset 0. 2 Ethernet MAC Enables the RX Clock, TX clock derived from the Internal PHY. The EPH Clock is also enabled. 3 Write the PDN bit in PHY MI Register 0 to 0 Note: Only performed when device is in internal PHY mode. The PHY is then set in isolation mode (MII_DIS bit is set). Need to clear this MII_DIS bit; and, need to wait for 500 ms for the PHY to restore normal. 4 Internal PHY entered normal operation mode 5 Issue MMU Reset Command 6 Restore Device Register Level Context. 7 Enable Transmitter – Set the TXENA bit of the Transmit Control Register Ethernet MAC can now transmit Ethernet Packets. 8 Enable Receiver – Set (1) the RXEN bit of the Receive Control Register. Ethernet MAC is now able to receive Packets. 9 Ethernet MAC is now restored for normal operation. S/W Driver MAC Side 1 ISSUE ALLOCATE MEMORY FOR TX - N BYTES - the MMU attempts to allocate N bytes of RAM. 2 WAIT FOR SUCCESSFUL COMPLETION CODE - Poll until the ALLOC INT bit is set or enable its mask bit and wait for the interrupt. The TX packet number is now at the Allocation Result Register. 3 LOAD TRANSMIT DATA - Copy the TX packet number into the Packet Number Register. Write the Pointer Register, then use a block move operation from the upper layer transmit queue into the Data Register. 4 ISSUE "ENQUEUE PACKET NUMBER TO TX FIFO" - This command writes the number present in the Packet Number Register into the TX FIFO. The transmission is now enqueued. No further CPU intervention is needed until a transmit interrupt is generated. 5 The enqueued packet will be transferred to the MAC block as a function of TXENA (nTCR) bit and of the deferral process (1/2 duplex mode only) state. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |