TMS470MF06607 datasheet(39/65 Pages) TI2

39 / 65 page

TMS470MF06607

www.ti.com

SPNS157C

– JANUARY 2012

Table 5-6. Summary of Wake Up from Low-Power Modes(1)

CLOCK

WAKE-UP

ACTIVE

MODE

SOURCE

WAKE-UP OPTIONS

CLOCK

WAKE-UP TIMES

CLOCKS

ACTIVE

SOURCE

Doze

Oscillator

RTICLK1

GIO interrupts, CAN Rx,

Oscillator

VREG wake up(2) + flash pump sleep(3) + flash pump

SCI/LIN Rx, RTI

standby(4)

Sleep

None

GIO interrupts, CAN Rx,

Oscillator

VREG wakeup + Osc. startup + 1024 Osc. cycles + flash

SCI/LIN Rx

pump sleep + flash pump standby

(1)

Low-power modes are not supported if the internal voltage regulator is disabled.

(2)

VREG wake up = thalt-normal (see Table 5-4).

(3)

Flash pump sleep = minimum time for which the flash pump is in sleep mode before it enters standby mode = 20

µs. The flash pump

sleep to standby counter must be programmed such that the (counter value X wake-up clock source period) is at least 20

µs.

(4)

Flash pump standby = minimum time for which the flash pump is in standby mode before it enters active mode = 1

µs. The flash pump

standby2active counter must be programmed such that the (counter value X wake-up clock source period) is at least 1

µs.

NOTE

The flash banks will wake up in parallel with the flash pump. The flash banks can wake up

faster than the flash pump and therefore the overall flash module wake-up time is determined

by the pump wake-up time.

Peripheral Information and Electrical Specifications

Submit Documentation Feedback

Product Folder Link(s): TMS470MF06607

TMS470MF06607 bảng dữ liệu(PDF) 39 Page - Texas Instruments

TMS470MF06607 bảng dữ liệu(HTML) 39 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

bảng dữ liệu tải về

Link URL