PM7344 datasheet(201/293 Pages) PMC

201 / 293 page

PM7344 S/UNI-MPH

DATA SHEET

PMC-950449

ISSUE 6

MULTI-PHY USER NETWORK INTERFACE

PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE

185

HCS byte exiting the FIFO is 55H. When FIXPAT is logic 0, the pattern force

in the HCS byte is an alternating AAH/55H pattern which alternate every cell.

LCD:

The LCD bit indicates the state of the Loss of Cell Delineation indication.

When LCD is logic 1, an out of cell delineation (OCD) defect has persisted for

a programmable time (see the RXCP LCD Count Threshold register),

LCDI:

The LCDI bit is set to logic 1 when the state of loss of cell delineation (LCD)

changes. The LCDI bit position is set to logic 0 when this register is read.

LCDE:

The LCDE bit enables the generation of an interrupt when the LCD state

changes. When a logic 1 is written to the LCDE bit position, the interrupt

generation is enabled.

REMPTY4:

The REMPTY4 bit selects the amount of advance indication given on the

receive cell available (RCA) signal. When REMPTY4 is logic 1, RCA is

deasserted when the receive FIFO is almost empty and can accept no more

than four byte read requests before having no more cells available to be read.

When REMPTY4 is logic 0, RCA is deasserted to logic 0 when the receive

FIFO can accept no more read requests (if a read request is made while RCA

is low, the read request is ignored).

PM7344 bảng dữ liệu(PDF) 201 Page - PMC-Sierra, Inc