| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
VR4102 bảng dữ liệu(PDF) 164 Page - NEC |
|
|
|||||||||||||||||||||||||||||
VR4102 bảng dữ liệu(HTML) 164 Page - NEC |
|
164 / 701 page ![]() CHAPTER 6 EXCEPTION PROCESSING 164 (1) Interrupt enable Interrupts are enabled when all of the following conditions are true: — IE is set to 1. — EXL is cleared to 0. — ERL is cleared to 0. — The appropriate bit of the IM is set to 1. (2) Operating modes The following Status register bit settings are required for User, Kernel, and Supervisor modes. — The processor is in User mode when KSU = 10, EXL = 0, and ERL = 0. — The processor is in Supervisor mode when KSU = 01, EXL = 0, and ERL = 0. — The processor is in Kernel mode when KSU = 00, EXL = 1, or ERL = 1. (3) 32- and 64-bit modes The following Status register bit settings select 32- or 64-bit operation for User, Kernel, and Supervisor operating modes. Enabling 64-bit operation permits the execution of 64-bit opcodes and translation of 64-bit addresses. 64-bit operation for User, Kernel and Supervisor modes can be set independently. — 64-bit addressing for Kernel mode is enabled when KX bit = 1. 64-bit operations are always valid in Kernel mode. — 64-bit addressing and operations are enabled for Supervisor mode when SX bit = 1. — 64-bit addressing and operations are enabled for User mode when UX bit = 1. (4) Kernel address space accesses Access to the kernel address space is allowed when the processor is in Kernel mode. (5) Supervisor address space accesses Access to the supervisor address space is allowed when the processor is in Supervisor or Kernel mode. (6) User address space accesses Access to the user address space is allowed in any of the three operating modes. (7) Status after reset The contents of the Status register are undefined after resets, except for the following bits. x TS and SR are cleared to 0. x ERL and BEV are set to 1. x SR is 0 after Cold reset, and is 1 after Soft reset or NMI interrupt. Remark Cold reset and Soft reset are CPU core reset (see 7.4 RESET OF THE CPU CORE). For the reset of all the VR4102 including peripheral units, refer to CHAPTER 7 INITIALIZATION INTERFACE and CHAPTER 15 PMU. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |