X11SSL datasheet(84/124 Pages) ETC1

84 / 124 page

X11SSM(-F)/X11SSL(-F) User Manual

CPU SLOT7 PCI-E 3.0 X8

SLOT7 Max Link Speed

Use this item to configure the link speed of a PCI-E port specified by the user. The options

are

Auto, Gen1, Gen2, and Gen3.

SLOT7 Max Payload Size

Select Auto for the system BIOS to automatically set the maximum payload value for a PCI-E

device to enhance system performance. The options are

Auto, 128 TLP, and 256 TLP.

SLOT7 Slot Power Limit Value

Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+"

or "-" on your keyboard to change this value. The default setting is

75.

SLOT7 Slot Power Limit Scale

Use this feature to select the scale used for the slot power limit value. The options are

1.0x, 0.1x, 0.01x, and 0.001x.

Program PCIe ASPM After OPROM

PCIe ASPM, the Active State Power Management for PCI-Express slots, is a power

management protocol used to manage power consumption of serial-link devices installed

on PCI-Exp slots during a prolonged off-peak time. If this item is set to Enabled, PCI-E

ASMP will be programmed after OPROM. If this item is set to Disabled, the PCI-E ASPM

will be programmed before OPROM. The options are

Disabled and Enabled.



Memory Configuration

The following memory information will display:

• Memory RC Version

• Memory Frequency

• Total Memory

• VDD

• DIMMA1

• DIMMA2

• DIMMB1

• DIMMB2

• Memory Timings (tCL-tRCD-tRP-tRAS)

X11SSL bảng dữ liệu(PDF) 84 Page - List of Unclassifed Manufacturers