X11SSL datasheet(97/124 Pages) ETC1

97 / 124 page

Chapter 4: BIOS



Trusted Computing Configuration

Security Device Support

If this feature and the TPM jumper on the motherboard are both set to Enabled, onbaord

security devices will be enabled for TPM (Trusted Platform Module) support to enhance data

integrity and network security. Please reboot the system for a change on this setting to take

effect. The options are Disabled and

Enabled.

TPM State

This feature changes the TPM State. The options are

Disabled and Enabled. Note: The

system will restart to change the TPM State.

Pending TPM operation

Use this item to schedule a TPM-related operation to be performed by a security device for

system data integrity. Your system will reboot to carry out a pending TPM operation. The

options are

None and TPM Clear.

Device Select

Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices.

TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both

versions. The default setting is

Auto.

The following are informational status messages that indicate the current TPM State:

TPM Enabled Status

TPM Active Status

TPM Owner Status

TXT Support

Intel TXT (Trusted Execution Technology) helps protect against software-based attacks and

ensures protection, confidentiality and integrity of data stored or created on the system. Use

this feature to enable or disable TXT Support. The options are

Disabled and Enabled.

X11SSL bảng dữ liệu(PDF) 97 Page - List of Unclassifed Manufacturers