X11SSL datasheet(94/124 Pages) ETC1

94 / 124 page

X11SSM(-F)/X11SSL(-F) User Manual

COM2 Bits Per second

Use this feature to set the transmission speed for a serial port used in Console Redirection.

Make sure that the same speed is used in the host computer and the client computer. A lower

transmission speed may be required for long and busy lines. The options are 9600, 19200,

38400, 57600 and

115200 (bits per second).

COM2 Data Bits

Use this feature to set the data transmission size for Console Redirection. The options are

7 Bits and

8 Bits.

COM2 Parity

A parity bit can be sent along with regular data bits to detect data transmission errors. Select

Even if the parity bit is set to 0, and the number of 1's in data bits is even. Select Odd if the

parity bit is set to 0, and the number of 1's in data bits is odd. Select None if you do not want

to send a parity bit with your data bits in transmission. Select Mark to add a mark as a parity

bit to be sent along with the data bits. Select Space to add a Space as a parity bit to be sent

with your data bits. The options are

None, Even, Odd, Mark and Space.

COM2 Stop Bits

A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard serial data

communication. Select 2 Stop Bits if slower devices are used. The options are

1 and 2.

COM2 Flow Control

Use this feature to set the flow control for Console Redirection to prevent data loss caused

by buffer overflow. Send a "Stop" signal to stop sending data when the receiving buffer is full.

Send a "Start" signal to start sending data when the receiving buffer is empty. The options

are

None and Hardware RTS/CTS.

COM2 VT-UTF8 Combo Key Support

Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals. The

options are Disabled and

Enabled.

COM2 Recorder Mode

Select Enabled to capture the data displayed on a terminal and send it as text messages to

a remote server. The options are

Disabled and Enabled.

COM2 Resolution 100x31

Select Enabled for extended-terminal resolution support. The options are Disabled and

Enabled.

COM2 Legacy OS Redirection Resolution

Use this feature to select the number of rows and columns used in Console Redirection for

legacy OS support. The options are 80x24 and

80x25.

X11SSL bảng dữ liệu(PDF) 94 Page - List of Unclassifed Manufacturers

X11SSL bảng dữ liệu(HTML) 94 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL