X11SSL datasheet(25/124 Pages) ETC1

tên linh kiện	X11SSL

Giải thích chi tiết về linh kiện	X11SSM(-F)/X11SSL(-F) User Manual

PDF	124 Pages

Scroll/Zoom	100%

nhà sản xuất	ETC1 [List of Unclassifed Manufacturers]

Trang chủ

Logo

25 / 124 page

Chapter 2: Installation

2.3 Processor and Heatsink Installation

Warning: When handling the processor package, avoid placing direct pressure on the label

area of the fan.

Important:

• Always connect the power cord last, and always remove it before adding, removing or

changing any hardware components. Make sure that you install the processor into the

CPU socket before you install the CPU heatsink.

• If you buy a CPU separately, make sure that you use an Intel-certified multi-directional

heatsink only.

• Make sure to install the motherboard into the chassis before you install the CPU heatsink.

• When receiving a motherboard without a processor pre-installed, make sure that the plastic

CPU socket cap is in place and none of the socket pins are bent; otherwise, contact your

retailer immediately.

• Refer to the Supermicro website for updates on CPU support.

Load Lever

Installing the LGA1151 Processor

1. Press the load lever to release the load plate, which covers the CPU socket, from its

locking position.

Load Plate

X11SSL bảng dữ liệu(PDF) 25 Page - List of Unclassifed Manufacturers