X11SSL datasheet(83/124 Pages) ETC1

83 / 124 page

Chapter 4: BIOS



DMI/OPI Configuration

The following DMI information will display:

• DMI

DMI VC1 Control

Use this feature to enable or disable DMI Virtual Channel 1. The options are Enabled and

Disabled.

DMI VCm Control

Use this feature to enable or disable the DMI Virtual Channel map. The options are

Enabled

and Disabled.

DMI Link ASPM Control

Use this feature to set the ASPM (Active State Power Management) state on the SA (System

Agent) side of the DMI Link. The options are Disabled and

L1.

DMI Extended Sync Control

Use this feature to enable or disable the DMI extended synchronization. The options are

Enabled and

Disabled.

DMI De-Emphasis Control

Use this feature to configure the De-emphasis control on DMI. The options are -6dB and

-3.5dB.



PEG Port Configuration

CPU SLOT6 PCI-E 3.0 X8 (IN X16)

SLOT6 Max Link Speed

Use this item to configure the link speed of a PCI-E port specified by the user. The options

are

Auto, Gen1, Gen2, and Gen3.

SLOT6 Max Payload Size

Select Auto for the system BIOS to automatically set the maximum payload value for a PCI-E

device to enhance system performance. The options are

Auto, 128 TLP, and 256 TLP.

SLOT6 Slot Power Limit Value

Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+"

or "-" on your keyboard to change this value. The default setting is

75.

SLOT6 Slot Power Limit Scale

Use this feature to select the scale used for the slot power limit value. The options are

1.0x, 0.1x, 0.01x, and 0.001x.

X11SSL bảng dữ liệu(PDF) 83 Page - List of Unclassifed Manufacturers