| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TLE9461ES bảng dữ liệu(PDF) 46 Page - Infineon Technologies AG |
|
|
|||||||||||||||||||||||||||||
TLE9461ES bảng dữ liệu(HTML) 46 Page - Infineon Technologies AG |
|
46 / 140 page ![]() TLE9461ES Lite CAN SBC Family Voltage Regulator 1 Datasheet 46 Rev.1.1 2019-09-27 6.3 Electrical Characteristics Table 15 Electrical Characteristics VS = 5.5 V to 28 V; Tj = -40°C to +150°C; all voltages with respect to ground, positive current flowing into pin (unless otherwise specified) Parameter Symbol Values Unit Note or Test Condition Number Min. Typ. Max. Output Voltage including Line and Load Regulation VCC1,out1 4.9 5.0 5.1 V 1)SBC Normal Mode; 10µA < IVCC1< 150mA; P_7.3.1 Output Voltage including Line and Load Regulation (Full Load Current Range) VCC1,out2 4.9 5.0 5.1 V 1)SBC Normal Mode; 6V < VS < 28V; 10µA < IVCC1< 250mA P_7.3.18 Output Voltage including Line and Load Regulation (Higher Accuracy Range) VCC1,out3 4.95 – 5.05 V 1)2)SBC Normal Mode; 20mA < IVCC1 < 80mA; 8V < VS < 18V; 25°C < Tj < 125°C P_7.3.2 Output Voltage including Line and Load Regulation (Low-Power Mode) VCC1,out4 4.8 5.0 5.2 V SBC Stop Mode; 10µA < IVCC1< IVCC1,Ipeak P_7.3.3 Drop-OUt Voltage VCC1,d2 – – 500 mV IVCC1 = 250mA, VS = 5V P_7.3.8 VCC1 Active Peak Threshold 1 (Transition threshold between low-power and high- power mode regulator) IVCC1,Ipeak1,r 1.5 3.25 5.0 mA 2) ICC1 rising; VS = 13.5V; I_PEAK_TH = ‘0’ P_7.3.9 VCC1 Active Peak Threshold 1 (Transition threshold between high-power and low- power mode regulator) IVCC1,Ipeak1,f 1.2 2.3 3.5 mA 2) ICC1 falling; VS = 13.5V; I_PEAK_TH = ‘0’ P_7.3.10 VCC1 Active Peak Threshold 2 (Transition threshold between low-power and high- power mode regulator) IVCC1,Ipeak2,r 2.5 6.25 10 mA 2) ICC1 rising; VS = 13.5V; I_PEAK_TH = ‘1’ P_7.3.11 VCC1 Active Peak Threshold 2 (Transition threshold between high-power and low- power mode regulator) IVCC1,Ipeak2,f 2.2 4.5 8 mA 2) ICC1 falling; VS = 13.5V; I_PEAK_TH = ‘1’ P_7.3.12 Overcurrent Limitation (ICC1_LIM_ADJ= ‘00’) IVCC1,lim_00 0.6 0.75 0.95 A 2)3)current flowing out of pin, VCC1 = 0V, VS > 6V, default value P_7.3.13 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |