PC87591L datasheet(37/437 Pages) NSC

37 / 437 page

1.0 Introduction (Continued)

Revision 1.07

www.national.com

External Memory Mapping into Shared BIOS Memory

When the shared BIOS memory is enabled using the SHBM strap input (SHBM=1) or the Shared Memory Configuration

Registers (LDN=10h), the Expansion Memory address range is mapped into the address range of the host. The PC87591x

uses the wrap-around effect of the core address space (on a 2 Mbyte boundary) using “growing down” addresses, which

enables the host to view the Expansion flash as a continuation of the BIOS Memory. See Section 5.3.2 on page 297 for de-

tails of the memory mapping scheme.

Accessing I/O Expansion Space

The I/O expansion protocol enables implementing I/O devices or GPIO ports in the system, in addition to those available on-

chip, for IRD, OBD and DEV environments. In addition, in DEV environment, some of the on-chip I/O port pins are used to

interface with off-chip peripherals. In such a case, the I/O expansion protocol is used to implement the functionality of these

I/O ports, using off-chip external logic. Access to these ports is through the same addresses used for the ports’ on-chip im-

plementation.

56 K

64 K

128 K

2 M

1 M

Core Address Map

Expansion Memory Address

Figure 8. Expansion Memory (Zone 0) Address Range - PC87591E and PC87591S

1 M

64 K

2 M

1 M

Core Address Map

Expansion Memory Address

Figure 9. Expansion Memory (Zone 0) Address Range - PC87591L

1 M

PC87591L bảng dữ liệu(PDF) 37 Page - National Semiconductor (TI)