| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AN4088 bảng dữ liệu(PDF) 16 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4088 bảng dữ liệu(HTML) 16 Page - STMicroelectronics |
|
16 / 71 page ![]() Peripheral migration AN4088 16/71 DocID023072 Rev 3 containing a system clock configuration routine, depending on your application requirements. Table 10. Example of migrating system clock configuration code from STM32F1 to STM32F0 STM32F100x Value Line running at 24 MHz (PLL as clock source) with 0 wait states STM32F0xx running at 48 MHz (PLL as clock source) with 1 wait state /* Enable HSE ----------------------------*/ RCC->CR |= ((uint32_t)RCC_CR_HSEON); /* Wait till HSE is ready */ while((RCC->CR & RCC_CR_HSERDY) == 0) { } /* Flash configuration -------------------*/ /* Prefetch ON, Flash 0 wait state */ FLASH->ACR |= FLASH_ACR_PRFTBE | FLASH_ACR_LATENCY_0; /* AHB and APB prescaler configuration --*/ /* HCLK = SYSCLK */ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; /* PCLK2 = HCLK */ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; /* PLL configuration = (HSE / 2) * 6 = 24 MHz */ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); /* Enable PLL */ RCC->CR |= RCC_CR_PLLON; /* Wait till PLL is ready */ while((RCC->CR & RCC_CR_PLLRDY) == 0) { } /* Select PLL as system clock source ----*/ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) { } /* Enable HSE ----------------------------*/ RCC->CR |= ((uint32_t)RCC_CR_HSEON); /* Wait till HSE is ready */ while((RCC->CR & RCC_CR_HSERDY) == 0) { } /* Flash configuration -------------------*/ /* Prefetch ON, Flash 1 wait state */ FLASH->ACR |= FLASH_ACR_PRFTBE | FLASH_ACR_LATENCY; /* AHB and APB prescaler configuration --*/ /* HCLK = SYSCLK */ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; /* PCLK = HCLK */ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE_DIV1; /* PLL configuration = HSE*6=48MHz -*/ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLMULL6); /* Enable PLL */ RCC->CR |= RCC_CR_PLLON; /* Wait till PLL is ready */ while((RCC->CR & RCC_CR_PLLRDY) == 0) { } /* Select PLL as system clock source ----*/ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)RCC_CFGR_SWS_PLL) { } |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |