STM32F101X8_10 datasheet(83/85 Pages) STMICROELECTRONICS

83 / 85 page

STM32F101x8, STM32F101xB

Revision history

Doc ID 13586 Rev 13

83/85

21-Jul-2008

Small text changes.

Power supply supervisor on page 16 modified and VDDA added to

Table 8: General operating conditions on page 32.

Capacitance modified in Figure 11: Power supply scheme on page 30.

Table notes revised in Section 5: Electrical characteristics.

Maximum value of tRSTTEMPO modified in Table 10: Embedded reset and

power control block characteristics on page 34.

Values added to Table 15: Typical and maximum current consumptions

in Stop and Standby modes and Table 21: Typical current consumption in

Standby mode removed.

fHSE_ext modified in Table 19: High-speed external user clock

characteristics on page 44. fPLL_IN modified in Table 26: PLL

characteristics on page 49.

fHCLK corrected in Table 29: EMS characteristics.

Minimum SDA and SCL fall time value for Fast mode removed from

Table 38: I2C characteristics on page 60, note 1 modified.

th(NSS) modified in Table 40: SPI characteristics on page 62 and

Figure 30: SPI timing diagram - slave mode and CPHA = 0 on page 63.

CADC modified in Table 41: ADC characteristics on page 65 and

Figure 34: Typical connection diagram using the ADC modified.

fPCLK2 corrected in Table 43: ADC accuracy - limited test conditions and

Table 44: ADC accuracy.

Typical TS_temp value removed from Table 45: TS characteristics on

page 69.

LQFP48 package specifications updated (see Table 50, Table 45 and

Table 46).

Axx option removed from Table 52: Ordering information scheme on

page 78.

24-Jul-2008

First page modified: “Up to 2 x I²C interfaces” instead of “1 x I²C

interface”

23-Sep-2008

STM32F101xx devices with 32 Kbyte Flash memory capacity removed,

document updated accordingly.

Section 2.2: Full compatibility throughout the family on page 14 updated.

Notes modified in Table 4: Medium-density STM32F101xx pin definitions

on page 24.

Note 2 modified below Table 5: Voltage characteristics on page 31,

V

DDx| min and |VDDx| min removed.

Note 2 added to Table 8: General operating conditions on page 32.

Measurement conditions specified in Section 5.3.5: Supply current

characteristics on page 35.

IDD in standby mode at 85 °C modified in Table 15: Typical and maximum

current consumptions in Stop and Standby modes on page 38.

General input/output characteristics on page 52 modified.

Note added below Table 52: Ordering information scheme.

Section 7.1: Future family enhancements removed. Small text changes.

Table 53.

Document revision history (continued)

Date

Revision

Changes

STM32F101X8 bảng dữ liệu(PDF) 83 Page - STMicroelectronics

STM32F101X8 bảng dữ liệu(HTML) 83 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85

bảng dữ liệu tải về

Link URL