| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TLC320AD50C/I bảng dữ liệu(PDF) 30 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TLC320AD50C/I bảng dữ liệu(HTML) 30 Page - Texas Instruments |
|
30 / 54 page ![]() 3–3 3.2.1 Hardware Secondary Serial Communication Request The FC requests a secondary communication when it is asserted. The FC terminal is latched at the rising edge of FS (primary communication), so FC should be pulled high before the rising edge of the primary frame sync (FS). Figures 3–3 and 3–4 show the FS output from a master device. ADC Data Out FC DOUT DIN FS Register Read/Write ADC Data Out DAC Data In Register Read/Write DAC Data In Secondary Request No Secondary Request PP S Figure 3–3. FS Output When Hardware Secondary Serial Communication Is Requested Only Once (No Slave) FS (Master) FC (See Note) S1 S2 S3 MS1 S2 S3 MM PP P PS S S SP NOTE: FC of master device and slave devices should connect together. Figure 3–4. FS Output When Hardware Secondary Serial Communication Is Requested Only Once (Three Slaves) 3.2.2 Software Secondary Serial Communication Request The LSB of the DAC data within a primary transfer can request a secondary communication when the device is in the 15-bit mode. For all serial communications, the most significant bit is transferred first. For a 16-bit ADC word and a 16-bit DAC word, D15 is the most significant bit and D0 is the least significant bit. For a 15-bit DAC data word in a primary communication, D15 is the most significant bit and D1 is the least significant bit. Bit D0 is then used for the secondary communication request control. All digital data values are in 2s complement data format (Figure 3–5). If the data format is set to the 16-bit word mode, all 16 bits are either ADC or DAC data and secondary communication can then be requested only by hardware (FC terminal). Data (D0 = 1) DIN FS Register Read/Write Data (D0 = 0) Secondary Communication Request No Secondary Communication Request PS P NOTE: See Figure 3–8 for secondary communication DIN data format. Figure 3–5. FS Output During Software Secondary Serial Communication Request (No Slave) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |