MPC821 datasheet(190/242 Pages) NXP

190 / 242 page

Support Information

MPC860TFADS Daughter Board Design Specification—Rev 0.1

MOTOROLA

PRELIMINARY—SUBJECT TO CHANGE WITHOUT NOTICE

5 - Support Information

In this chapter all information needed for support, maintenance and connectivity to the

MPC860TFADSDB is provided.

5•1

Interconnect Signals

The MPC860TFADSDB interconnects with external devices via the following set of connectors:

P1, P2, P3, P4, P5, P6 and P8 - Logic Analyzer connectors

P9 RJ45 connector for the Fast Ethernet.

U3 Fiber Optic Tranceiver (Connector not mounted on the board).

PM1, PM2, PM3 and PM4 - Mother Board Connectors

PX1, PX2, PX3 & PX4 - Expansion Connectors

MPC8XXFADS’s P8 - Serial Ports’ Expansion ConnectorA

5•1•1

P1, P2, P3, P4, P5, P6 and P8 - Logic Analyzer Connectors

These connectors are 38 pin, receptacle MICTOR connectors made by AMP. Each connector

connects to a dedicated adaptor for HP 16500 series of logic analyzer, which interconnects to two 16

bit pods Since all the signals that appear on these connectors appear also on the mother-board con-

nectors and on the expansion connectors, they are described there.

A. This connector is located on the Mother Board. It is documented here since its contents depends on the Daugh-

ter Board.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MPC821 bảng dữ liệu(PDF) 190 Page - NXP Semiconductors