P5021 datasheet(82/155 Pages) NXP

82 / 155 page

P5021 QorIQ Integrated Processor Data Sheet, Rev. 1

Electrical characteristics

Freescale Semiconductor

2.12.3.1

Ethernet management interface 1 DC electrical characteristics

The Ethernet management interface 1 is defined to operate at a supply voltage of 3.3 V. The DC electrical characteristics for the

Ethernet management interface is provided in this table.

The Ethernet management interface 1 is defined to operate at a supply voltage of 3.3 V. The DC electrical characteristics for the

Ethernet management interface 1 is provided in Table 37.

2.12.3.2

Ethernet management interface 2 DC electrical characteristics

Ethernet management interface 2 pins function as open drain I/Os. The interface conforms to 1.2 V nominal voltage levels.

LVDD must be powered to use this interface. The DC electrical characteristics for EMI2_MDIO and EMI2_MDC are provided

in this section.

Table 37. Ethernet management Interface 1 DC electrical characteristics (LVDD = 3.3 V)

For recommended operating conditions, see Table 3.

Parameter

Symbol

Min

Max

Unit

Note

Input high voltage

VIH

2.0

—

Input low voltage

VIL

—0.9

Input high current (LVDD = Max, VIN = 2.1 V)

IIH

—40

μA

Input low current (LVDD = Max, VIN = 0.5 V)

IIL

–600

—

μA

Output high voltage (LVDD = Min, IOH = –1.0 mA)

VOH

2.4

—

Output low voltage (LVDD = Min, IOL = 1.0 mA)

VOL

—0.4

—

Note:

1. The symbol VIN, in this case, represents the LVIN symbol referenced in Table 2 and Table 3.

2. The min VIL and max VIH values are based on the respective LVIN values found in Table 3.

Table 38. Ethernet management interface 1 DC electrical characteristics (LVDD = 2.5 V)

For recommended operating conditions, see Table 3.

Parameter

Symbol

Min

Max

Unit

Note

Input high voltage

VIH

1.7

—

Input low voltage

VIL

—0.7

Input current (LVIN = 0 V or LVIN = LVDD)IIH

—±40

μA

Output high voltage (LVDD = Min, IOH = –1.0 mA)

VOH

2.4

—

Output low voltage (LVDD = Min, IOL = 1.0 mA)

VOL

—0.4

—

Note:

1. The min VILand max VIH values are based on the respective min and max LVIN values found in Table 3.

2. The symbol LVIN, in this case, represents the LVIN symbol referenced in Section 2.1.2, “Recommended operating conditions.”

Table 39. Ethernet management interface 2 DC electrical characteristics (1.2 V)

For recommended operating conditions, see Table 3.

Parameter

Symbol

Min

Max

Unit

Note

Input high voltage

VIH

0.84

—

Input low voltage

VIL

—0.36

—

P5021 bảng dữ liệu(PDF) 82 Page - NXP Semiconductors

P5021 bảng dữ liệu(HTML) 82 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL