FXLS8471Q datasheet(28/75 Pages) FREESCALE

28 / 75 page

FXLS8471Q

Sensors

Freescale Semiconductor, Inc.

Registers by Functional Blocks

10.1

Device configuration

10.1.1

STATUS (0x00) register

The STATUS register aliases allow for the contiguous burst read of both status and current acceleration sample/FIFO data using

the auto-increment addressing mechanism in both 8- and 14-bit modes.

10.1.2

DR_STATUS (0x00) register

Data-Ready Status when F_SETUP[f_mode] = 0x00

This STATUS register provides the acquisition status information on a per-sample basis, and reflects real-time updates to the

OUT_X, OUT_Y, and OUT_Z registers.

When the FIFO subsystem data output register driver is disabled (F_SETUP[f_mode] = 2’b00), this register indicates the real-

time status information of the accelerometer X, Y, and Z axes sample data.

Table 14. STATUS register

DR_STATUS or F_STATUS

00000000

Table 15. STATUS Description

Field

Description

F_SETUP[f_mode] = 2’b00

→ DR_STATUS

F_SETUP[f_mode] > 2’b00

→ F_STATUS

Table 16. DR_STATUS register

zyxow

zow

yow

xow

zyxdr

zdr

ydr

xdr

00000000

Table 17. DR_STATUS description

Field

Description

zyxow

zyxow is set to 1 whenever new data is acquired before completing the retrieval of the previous set. This event occurs when

the content of at least one acceleration data register (that is, OUT_X, OUT_Y, and OUT_Z) has been overwritten. zyxow is

cleared when the high-bytes of the acceleration data (OUT_X_MSB, OUT_Y_MSB, and OUT_Z_MSB) are read.

X, Y, Z-axis data overwrite.

0: No data overwrite has occurred

1: Previous X, Y, Z data was overwritten by new X, Y, Z data before it was completely read

zow

zow is set to 1 whenever a new Z-axis acquisition is completed before the retrieval of the previous data. When this occurs the

previous data is overwritten. zow is cleared anytime OUT_Z_MSB register is read.

Z-axis data overwrite.

0: No data overwrite has occurred

1: Previous Z-axis data was overwritten by new Z-axis data before it was read

yow

yow is set to 1 whenever a new Y-axis acquisition is completed before the retrieval of the previous data. When this occurs the

previous data is overwritten. yow is cleared anytime OUT_Y_MSB register is read.

Y-axis data overwrite.

0: No data overwrite has occurred

1: Previous Y-axis data was overwritten by new Y-axis data before it was read

xow

xow is set to 1 whenever a new X-axis acquisition is completed before the retrieval of the previous data. When this occurs the

previous data is overwritten. xow is cleared anytime OUT_X_MSB register is read.

X-axis data overwrite.

0: No data overwrite has occurred

1: Previous X-axis data was overwritten by new X-axis data before it was read

FXLS8471Q bảng dữ liệu(PDF) 28 Page - Freescale Semiconductor, Inc

FXLS8471Q bảng dữ liệu(HTML) 28 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

bảng dữ liệu tải về

Link URL