LPC64 datasheet(26/65 Pages) NXP

26 / 65 page

LPC1768_67_66_65_64_3

Product data sheet

Rev. 03 — 19 November 2009

26 of 65

NXP Semiconductors

LPC1768/67/66/65/64

32-bit ARM Cortex-M3 microcontroller

The I2S-bus provides a standard communication interface for digital audio applications.

The I2S-bus specification defines a 3-wire serial bus using one data line, one clock line,

and one word select signal. The basic I2S-bus connection has one master, which is

always the master, and one slave. The I2S-bus interface on the LPC1768/67/66/65

provides a separate transmit and receive channel, each of which can operate as either a

master or a slave.

7.20.1 Features

• The interface has separate input/output channels each of which can operate in master

or slave mode.

• Capable of handling 8-bit, 16-bit, and 32-bit word sizes.

• Mono and stereo audio data supported.

• The sampling frequency can range from 16 kHz to 96 kHz (16, 22.05, 32, 44.1, 48,

96) kHz.

• Support for an audio master clock.

• Configurable word select period in master mode (separately for I2S-bus input and

output).

• Two 8-word FIFO data buffers are provided, one for transmit and one for receive.

• Generates interrupt requests when buffer levels cross a programmable boundary.

• Two DMA requests, controlled by programmable buffer levels. These are connected

to the GPDMA block.

• Controls include reset, stop and mute options separately for I2S-bus input and I2S-bus

output.

7.21 General purpose 32-bit timers/external event counters

The LPC17xx include four 32-bit timer/counters. The timer/counter is designed to count

cycles of the system derived clock or an externally-supplied clock. It can optionally

generate interrupts, generate timed DMA requests, or perform other actions at specified

timer values, based on four match registers. Each timer/counter also includes two capture

inputs to trap the timer value when an input signal transitions, optionally generating an

interrupt.

7.21.1 Features

• A 32-bit timer/counter with a programmable 32-bit prescaler.

• Counter or timer operation.

• Two 32-bit capture channels per timer, that can take a snapshot of the timer value

when an input signal transitions. A capture event may also generate an interrupt.

• Four 32-bit match registers that allow:

– Continuous operation with optional interrupt generation on match.

– Stop timer on match with optional interrupt generation.

– Reset timer on match with optional interrupt generation.

• Up to four external outputs corresponding to match registers, with the following

capabilities:

LPC64 bảng dữ liệu(PDF) 26 Page - NXP Semiconductors

LPC64 bảng dữ liệu(HTML) 26 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

bảng dữ liệu tải về

Link URL