| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PCIMX515CJM6C bảng dữ liệu(PDF) 96 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
PCIMX515CJM6C bảng dữ liệu(HTML) 96 Page - Freescale Semiconductor, Inc |
|
96 / 184 page ![]() i.MX51 Applications Processors for Consumer and Industrial Products, Rev. 1 96 Freescale Semiconductor Preliminary—Subject to Change Without Notice Electrical Characteristics 3.7.8.8 Standard Serial Interfaces The IPU supports the following types of asynchronous serial interfaces: 1. 3-wire (with bidirectional data line). 2. 4-wire (with separate data input and output lines). 3. 5-wire type 1 (with sampling RS by the serial clock). 4. 5-wire type 2 (with sampling RS by the chip select signal). The IPU has four independent outputs and one input. The port can be configured to provide 3, 4, or 5-wire interfaces. Figure 61 depicts the timing diagram of the 3-wire serial interface. The timing diagrams correspond to active-low IPP#_CS signal and the straight polarity of the IPP_CLK signal. For this interface, a bidirectional data line is used outside the chip. The IPU still uses separate input and output data lines (IPP_IND_DISPB_SD_D and IPP_DO_DISPB_SD_D). The I/O mux should provide joining the internal data lines to the bidirectional external line according to the IPP_OBE_DISPB_SD_D signal provided by the IPU. 9Display control up for read DISP_UP is predefined in REGISTER 10Display control down for read DISP_DOWN is predefined in REGISTER 11Display control up for write DISP_UP is predefined in REGISTER 12This parameter is a requirement to the display connected to the IPU 13Data read point Note: DISP#_READ_EN—operand of DC’s MICROCDE READ command to sample incoming data 14Loop back delay Tlbd is the cumulative propagation delay of read controls and read data. It includes an IPU output delay, a chip-level output delay, board delays, a chip-level input delay, an IPU input delay. This value is chip specific. Tdicur 1 2 ---T DI_CLK ceil × 2 DISP_UP_# × DI_CLK_PERIOD ----------------------------------------------- ⎝⎠ ⎛⎞ = Tdicdrw 1 2 ---T DI_CLK ceil × 2 DISP_DOWN_# × DI_CLK_PERIOD ----------------------------------------------------- ⎝⎠ ⎛⎞ = Tdicuw 1 2 ---T DI_CLK ceil × 2 DISP_UP_# × DI_CLK_PERIOD ----------------------------------------------- ⎝⎠ ⎛⎞ = Tdrp T DI_CLK ce il × DISP#_READ_EN DI_CLK_PERIOD ------------------------------------------------- = |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |