| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PCIMX515CJM6C bảng dữ liệu(PDF) 32 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
PCIMX515CJM6C bảng dữ liệu(HTML) 32 Page - Freescale Semiconductor, Inc |
|
32 / 184 page ![]() i.MX51 Applications Processors for Consumer and Industrial Products, Rev. 1 32 Freescale Semiconductor Preliminary—Subject to Change Without Notice Electrical Characteristics 3.5.2 Fast I/O AC Parameters 3.5.3 I2C AC Parameters NOTE: See the errata for HS-I2C in i.MX51 Chip Errata document. The two standard I2C modules have no errata Figure 6 depicts the load circuit for output pads for standard- and fast-mode. Figure 7 depicts the output pad transition time definition. Figure 6 depicts pull-up current source measurement for HS-mode. Figure 8 Output Pad di/dt (Low drive) tdit — — — 7 mA/ns Input Transition Times1 trm — — — 25 ns 1 Hysteresis mode is recommended for inputs with transition times greater than 25 ns. Table 25. Fast I/O AC Parameters Parameter Symbol Test Condition Min Rise/Fall Typ Max Rise/Fall Unit Output Pad Transition Times (Max Drive) tr, tf 15 pF 35 pF — — 1.429/1.275 2.770/2.526 ns Output Pad Transition Times (High Drive) tr, tf 15 pF 35 pF — — 1.793/1.607 3.565/3.29 ns Output Pad Transition Times (Medium Drive) tr, tf 15 pF 35 pF — — 2.542/2.257 5.252/4.918 ns Output Pad Transition Times (Low Drive) tr, tf 15 pF 35 pF — — 4.641/4.456 10.699/10.0 ns Output Pad Slew Rate (Max Drive) tps 15 pF 35 pF 0.69/0.78 0.36/0.39 —— V/ns Output Pad Slew Rate (High Drive) tps 15 pF 35 pF 0.55/0.62 0.28/0.30 —— V/ns Output Pad Slew Rate (Medium Drive) tps 15 pF 35 pF 0.39/0.44 0.19/0.20 —— V/ns Output Pad Slew Rate (Low Drive) tps 15 pF 35 pF 0.21/0.22 0.09/0.1 —— V/ns Output Pad di/dt (Max Drive) tdit — — — 70 mA/ns Output Pad di/dt (High Drive) tdit — — — 53 mA/ns Output Pad di/dt (Medium drive) tdit — — — 35 mA/ns Output Pad di/dt (Low drive) tdit — — — 18 mA/ns Input Transition Times1 1 Hysteresis mode is recommended for inputs with transition time greater than 25 ns. trm — — — 25 ns Table 24. Slow I/O AC Parameters (continued) Parameter Symbol Test Condition Min Rise/Fall Typ Max Rise/Fall Unit |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |