| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMPR4925 bảng dữ liệu(PDF) 268 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMPR4925 bảng dữ liệu(HTML) 268 Page - Toshiba Semiconductor |
|
268 / 590 page ![]() Chapter 10 PCI Controller 10-6 10.3.3 Supported PCI Bus Commands Table 10.3.1 shows the PCI Bus commands that the PCI Controller supports. Table 10.3.1 Supported PCI Bus Commands C/BE Value PCI Command As Initiator As Target 0000 Interrupt Acknowledge † 0001 Special Cycle † 0010 I/O Read √√ 0011 I/O Write √√ 0100 (Reserved) 0101 (Reserved) 0110 Memory Read √√ 0111 Memory Write √√ 1000 (Reserved) 1001 (Reserved) 1010 Configuration Read √ ‡ 1011 Configuration Write √ ‡ 1100 Memory Read Multiple √√ 1101 Dual Address Cycle 1110 Memory Read Line √√ 1111 Memory Write and Invalidate √√ √ : Supported when in both the Host mode and the Satellite mode † : Supported only when in the Host mode ‡ : Supported only when in the Satellite mode — : Not supported • I/O Read, I/O Write, Memory Read, Memory Write This command executes Read/Write access to the address mapped on the G-Bus and PCI Bus. • Memory Read Multiple, Memory Read Line The Memory Read Multiple command is issued if all of the following conditions are met when the Initiator function is operating and Burst Read access is issued from the G-Bus to the PCI Bus. (1) A value other than “0” is set to the Cache Line Size Field (PCICFG1.CLS) of the PCI Configuration 1 Register. (2) The Read data word count is larger than the value set in the Cache Line Size Field. Also, the Read Memory Line command is issued when all of the following conditions are met. (1) A value other than “0” is set to the Cache Line Size Field (PCICFG1.CLS) of the PCI Configuration 1 Register. (2) The Read data word count is larger than the value set in the Cache Line Size Field. The Memory Read command is issued if these conditions are not met, namely, if “0” is set to the Cache Line Size field (PCICFG1.CLS) of the PCI Configuration 1 Register. In the case of the target, a normal G-Bus cycle is issued to the address mapped from the PCI Bus to the G-Bus. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |