| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMPR4925 bảng dữ liệu(PDF) 122 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMPR4925 bảng dữ liệu(HTML) 122 Page - Toshiba Semiconductor |
|
122 / 590 page ![]() Chapter 7 External Bus Controller 7-12 7.3.7 Access Timing 7.3.7.1 SHWT Option The SHWT option is selected when the SHWT (Setup/Hold Wait Time) field of the Channel Control Register is a value other than “0”. This option inserts a Setup cycle and a Hold cycle between the current signal and the next signal. Setup cycle: CE* from ADDR, OE* from CE*, BWE* from CE*, SWE* from CE* Hold cycle: ADDR from CE*, CE* from OE*, CE* from BWE*, CE* from SWE* This option is used for I/O devices that are generally slow. All Setup cycles and Hold cycles will be identical, so each cycle cannot be set individually. The SHWT mode cannot be used by the Page mode. The SHWT mode can be used by all other modes, but there is one restriction: the internal bus cannot use Burst access. Figure 7.3.5 SWHT Disable (Normal Mode, Single Read/Write Cycle) Figure 7.3.6 SHWT 1 Wait (Normal Mode, Single Read/Write Cycle) SYSCLK CE*/BE* ADDR [19:0] OE* DATA [31:0] ACK*/READY (Output) EBCCRn.PWT:WT=0 EBCCRn.SHWT=0 SWE*/BWE* SYSCLK CE*/BE* ADDR [19:0] OE* DATA [31:0] ACK*/READY (Output) EBCCRn.PWT:WT=0 EBCCRn.SHWT=1 SWE*/BWE* |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |