| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
26HS01GTAM03 bảng dữ liệu(PDF) 128 Page - Infineon Technologies AG |
|
|
|||||||||||||||||||||||||||||
26HS01GTAM03 bảng dữ liệu(HTML) 128 Page - Infineon Technologies AG |
|
128 / 166 page ![]() Datasheet 128 of 166 002-12337 Rev. *Y 2022-01-18 256Mb/512Mb/1Gb SEMPER™ Flash HYPERBUS™ interface, 1.8V/3.0V Transaction table SECTEN_3_1 ASO Sector Erase Count Sector Erase Count Volatile Register ASO Entry transaction allows accessing the Sector Erase Count Register. This entry transaction does not use a sector address from the entry transaction. 3 LDSRAD_2_1 Load Sector Address transaction loads the sector address whose erase count is desired. 2 RDSECV_1_0 Read Volatile Sector Erase Count Register transaction allows reading the contents of the 16-bit Volatile Sector Erase Count Register and places it on DQ[7:0]. 1 ASOEXT_1_1 ASO Exit transaction returns the device to reading memory array data mode when device is in an ASO. If any of the ASO Entry commands were issued, an ASO Exit command must be issued to reset the device into Read mode. 1 ENX_EN_3_1 ASO EnduraFlex EnduraFlex Pointer Selection (Partitions) One-Time_Programmable Register ASO Entry transaction allows accessing the EnduraFlex Pointer registers. This entry transaction does not use a sector address from the entry transaction. 3 PGOENX_2_1 Program One-Time-Programmable EnduraFlex Registers [4:0] transaction programs the One-Time-Programmable EnduraFlex registers [3:0] with data placed on DQ[7:0]. Addresses 0x00, 0x01, 0x02, 0x03, 0x04 define the four EnduraFlex Register values. 2 RDOENX_1_1 Read One-Time-Programmable EnduraFlex Registers [4:0] transaction reads the One-Time-Programmable EnduraFlex registers [3:0] and places it on DQ[7:0]. Addresses 0x00, 0x01, 0x02, 0x03, 0x04 define the four EnduraFlex Register values. 1 ASOEXT_1_1 ASO Exit transaction returns the device to reading memory array data mode when device is in an ASO. If any of the ASO Entry commands were issued, an ASO Exit command must be issued to reset the device into Read mode. 1 Table 120 HYPERBUS™ transaction description (Continued) Transaction name Description Cycles |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |