DP83848JSQSLASHNOPB datasheet(54/84 Pages) TI1

54 / 84 page

DP83848H, DP83848J, DP83848K, DP83848M, DP83848T

SNLS250E – MAY 2008 – REVISED APRIL 2015

www.ti.com

Table 6-13. Auto-Negotiation Advertisement Register (ANAR), address 0x04 (continued)

Bit

Bit Name

Default

Description

PAUSE

0, RW

PAUSE Support for Full Duplex Links:

The PAUSE bit indicates that the device is capable of providing the symmetric PAUSE

functions as defined in Annex 31B.

Encoding and resolution of PAUSE bits is defined in IEEE 802.3 Annex 28B, Tables 28B-2 and

28B-3, respectively. Pause resolution status is reported in PHYCR[13:12].

1 = Advertise that the DTE (MAC) has implemented both the optional MAC control sublayer

and the pause function as specified in clause 31 and annex 31B of 802.3.

0= No MAC based full duplex flow control.

0, RO/P

100BASE-T4 Support:

1= 100BASE-T4 is supported by the local device.

0 = 100BASE-T4 not supported.

TX_FD

Strap, RW

100BASE-TX Full Duplex Support:

1 = 100BASE-TX Full Duplex is supported by the local device.

0 = 100BASE-TX Full Duplex not supported.

Strap, RW

100BASE-TX Support:

1 = 100BASE-TX is supported by the local device.

0 = 100BASE-TX not supported.

10_FD

10BASE-T Full Duplex Support:

1 = 10BASE-T Full Duplex is supported by the local device.

0 = 10BASE-T Full Duplex not supported.

10BASE-T Support:

1 = 10BASE-T is supported by the local device.

0 = 10BASE-T not supported.

4:0

Selector

<00001>, RW

Protocol Selection Bits:

These bits contain the binary encoded protocol selector supported by this port. <00001>

indicates that this device supports IEEE 802.3.

6.6.1.1.6 Auto-Negotiation Link Partner Ability Register (ANLPAR) (BASE Page)

This register contains the advertised abilities of the Link Partner as received during Auto-Negotiation. The

content changes after the successful auto-negotiation if Next-pages are supported.

Table 6-14. Auto-Negotiation Link Partner Ability Register (ANLPAR) (BASE Page), address 0x05

Bit

Bit Name

Default

Description

0, RO

Next Page Indication:

0 = Link Partner does not desire Next Page Transfer.

1 = Link Partner desires Next Page Transfer.

ACK

0, RO

Acknowledge:

1 = Link Partner acknowledges reception of the ability data word.

0 = Not acknowledged.

The Auto-Negotiation state machine will automatically control the this bit based on the incoming

FLP bursts.

0, RO

Remote Fault:

1 = Remote Fault indicated by Link Partner.

0 = No Remote Fault indicated by Link Partner.

RESERVED

0, RO

RESERVED for Future IEEE use:

Write as 0, read as 0.

ASM_DIR

0, RO

ASYMMETRIC PAUSE:

1 = Asymmetric pause is supported by the Link Partner.

0 = Asymmetric pause is not supported by the Link Partner.

PAUSE

0, RO

PAUSE:

1 = Pause function is supported by the Link Partner.

0 = Pause function is not supported by the Link Partner.

0, RO

100BASE-T4 Support:

1 = 100BASE-T4 is supported by the Link Partner.

0 = 100BASE-T4 not supported by the Link Partner.

Detailed Description

Submit Documentation Feedback

Product Folder Links: DP83848H DP83848J DP83848K DP83848M DP83848T

DP83848JSQ/NOPB bảng dữ liệu(PDF) 54 Page - Texas Instruments

DP83848JSQ/NOPB bảng dữ liệu(HTML) 54 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

bảng dữ liệu tải về

Link URL