PIC18F2680ISPSQTP datasheet(50/482 Pages) MICROCHIP

50 / 482 page

PIC18F2585/2680/4585/4680

DS39625C-page 48

Preliminary

4.6

Reset State of Registers

Most registers are unaffected by a Reset. Their status

is unknown on POR and unchanged by all other

Resets. The other registers are forced to a “Reset

state” depending on the type of Reset that occurred.

Most registers are not affected by a WDT wake-up,

since this is viewed as the resumption of normal

operation. Status bits from the RCON register, RI, TO,

PD, POR and BOR, are set or cleared differently in

different Reset situations, as indicated in Table 4-3.

These bits are used in software to determine the nature

of the Reset.

Table 4-4 describes the Reset states for all of the

Special Function Registers. These are categorized by

Power-on and Brown-out Resets, Master Clear and

WDT Resets and WDT wake-ups.

TABLE 4-3:

STATUS BITS, THEIR SIGNIFICANCE AND THE INITIALIZATION CONDITION FOR

RCON REGISTER

Condition

Program

Counter

RCON Register

STKPTR Register

SBOREN

POR BOR

STKFUL

STKUNF

Power-on Reset

0000h

111

RESET

Instruction

0000h

u(2)

0uu

Brown-out

0000h

u(2)

111

MCLR during Power Managed

Run modes

0000h

u(2)

u1u

MCLR during Power Managed

Idle modes and Sleep mode

0000h

u(2)

u10

WDT Time-out during Full Power

or Power Managed Run modes

0000h

u(2)

u0u

MCLR during Full Power

Execution

0000h

u(2)

uuu

Stack Full Reset (STVREN = 1)

0000h

u(2)

uuu

Stack Underflow Reset

(STVREN = 1)

0000h

u(2)

uuu

Stack Underflow Error (not an

actual Reset, STVREN = 0)

0000h

u(2)

uuu

WDT Time-out during Power

Managed Idle or Sleep modes

PC + 2

u(2)

u00

Interrupt Exit from Power

Managed modes

PC + 2(1)

u(2)

uu0

Legend: u = unchanged

Note 1:

When the wake-up is due to an interrupt and the GIEH or GIEL bits are set, the PC is loaded with the

interrupt vector (008h or 0018h).

Reset state is ‘1’ for POR and unchanged for all other Resets when software BOR is enabled

(BOREN1:BOREN0 Configuration bits = 01 and SBOREN = 1); otherwise, the Reset state is ‘0’.

PIC18F2680ISPSQTP bảng dữ liệu(PDF) 50 Page - Microchip Technology

PIC18F2680ISPSQTP bảng dữ liệu(HTML) 50 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL