MSP432P411VIPZ datasheet(55/212 Pages) TI1

55 / 212 page

MSP432P4111, MSP432P4011, MSP432P411Y

MSP432P401Y, MSP432P411V, MSP432P401V

www.ti.com

SLASEA0A – DECEMBER 2017 – REVISED FEBRUARY 2018

Submit Documentation Feedback

Product Folder Links: MSP432P4111 MSP432P4011 MSP432P411Y MSP432P401Y MSP432P411V MSP432P401V

Specifications

Table 5-11. High-Frequency Crystal Oscillator, HFXT (continued)

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)

PARAMETER

TEST CONDITIONS

VCC

MIN

TYP

MAX

UNIT

(4)

Does not include programable start-up counter.

(5)

This represents all the parasitic capacitance present at the HFXIN and HFXOUT terminals, respectively, including parasitic bond and

package capacitance. The effective load capacitance, CL,eff can be computed as CIN × COUT / (CIN + COUT), where CIN and COUT are the

total capacitance at the HFXIN and HFXOUT terminals, respectively.

(6)

Requires external capacitors at both terminals to meet the effective load capacitance specified by crystal manufacturers. Recommended

effective load capacitance values supported are 14 pF, 16 pF, and 18 pF. Maximum shunt capacitance of 7 pF. The PCB adds

additional capacitance, so it must also be considered in the overall capacitance. Verify that the recommended effective load capacitance

of the selected crystal is met.

(7)

Frequencies greater than the MAX specification do not set the fault flag. Frequencies between the MIN and MAX specification may set

the flag. A static condition or stuck-at-fault condition sets the fault flag.

(8)

Measured with logic-level input frequency but also applies to operation with crystals.

tSTART,HFXT

Start-up time(4)

fOSC = 1 MHz,

HFXTBYPASS = 0, HFXTDRIVE = 0,

HFFREQ = 0, CL,eff = 16 pF,

Typical ESR and CSHUNT,

FCNTHF_EN = 0

3.0 V

fOSC = 4 MHz,

HFXTBYPASS = 0, HFXTDRIVE = 1,

HFFREQ = 0, CL,eff = 16 pF,

Typical ESR and CSHUNT,

FCNTHF_EN = 0

1.8

fOSC = 8 MHz,

HFXTBYPASS = 0, HFXTDRIVE = 1,

HFFREQ = 1, CL,eff = 16 pF,

Typical ESR and CSHUNT,

FCNTHF_EN = 0

0.7

fOSC = 16 MHz,

HFXTBYPASS = 0, HFXTDRIVE = 1,

HFFREQ = 2, CL,eff = 16 pF,

Typical ESR and CSHUNT,

FCNTHF_EN = 0

0.6

fOSC = 24 MHz,

HFXTBYPASS = 0, HFXTDRIVE = 1,

HFFREQ = 3, CL,eff = 16 pF,

Typical ESR and CSHUNT,

FCNTHF_EN = 0

450

µs

fOSC = 32 MHz,

HFXTBYPASS = 0, HFXTDRIVE = 1,

HFFREQ = 4, CL,eff = 16 pF,

Typical ESR and CSHUNT,

FCNTHF_EN = 0

300

fOSC = 40 MHz,

HFXTBYPASS = 0, HFXTDRIVE = 1,

HFFREQ = 5, CL,eff = 16 pF,

Typical ESR and CSHUNT,

FCNTHF_EN = 0

250

fOSC = 48 MHz,

HFXTBYPASS = 0, HFXTDRIVE = 1,

HFFREQ = 6, CL,eff = 16 pF,

Typical ESR and CSHUNT,

FCNTHF_EN = 0

250

CHFXIN

Integrated load capacitance at

HFXIN terminal(5) (6)

CHFXOUT

Integrated load capacitance at

HFXOUT terminal(5) (6)

fFault,HFXT

Oscillator fault frequency(7) (8)

400

700

kHz

MSP432P411VIPZ bảng dữ liệu(PDF) 55 Page - Texas Instruments

MSP432P411VIPZ bảng dữ liệu(HTML) 55 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL