TL16PC564BLVI

PCMCIA UNIVERSAL ASYNCHRONOUS RECEIVER TRANSMITTER

SLLS627− SEPTEMBER 2004

14

POST OFFICE BOX 655303

standard voltage (5 V nominal)

MIN

NOM

MAX

UNIT

Supply voltage, VCC

4.75

5

5.25

V

Input voltage, VI

0

VCC

V

High-level input voltage (CMOS), VIH

0.7 VCC

V

Low-level input voltage (CMOS), VIL

0.2 VCC

V

Output voltage, VO (see Note 4)

0

VCC

V

High-level output current, IOH

All outputs except RST, STSCHG, OUT1, OUT2 (see Note 5)

4

mA

Low-level output current, IOL

All outputs except RST

4

mA

Low-level output current, IOL

RST

8

mA

Input transition time, tt

0

25

ns

Operating free-air temperature range, TA

−40

25

85

°C

Junction temperature range, TJ (see Note 6)

−40

25

115

°C

NOTES:

4. Applies for external output buffers

5. RST, STSCHG, OUT1, and OUT2 are open-drain outputs, so IOH does not apply.

6. These junction temperatures reflect simulation conditions. Absolute maximum junction temperature is 150

°C. The customer is

responsible for verifying junction temperature.

electrical characteristics over recommended ranges of operating free-air temperature and supply

voltage (unless otherwise noted)

low voltage (3.3 V nominal)

PARAMETER

TEST CONDITIONS

MIN

MAX

UNIT

VOH

High-level output voltage

IOH = rated

VCC −0.55

V

VOL

Low-level output voltage

IOL = rated

0.5

V

VIT +

Positive-going input threshold voltage (see Note 7)

0.7 VCC

V

VIT −

Negative-going input threshold voltage (see Note 7)

0.3 VCC

V

Vhys

Hysteresis (VIT + − VIT −) (see Note 7)

0.1 VCC

0.3 VCC

V

IOZ

3-state-output high-impedance current (see Note 8)

VI = VCC or GND

±10

µA

IIL

Low-level input current (see Note 9)

VI = GND

−1

µA

IIH

High-level input current (see Note 10)

VI = VCC

1

µA

standard voltage (5 V nominal)

PARAMETER

TEST CONDITIONS

MIN

MAX

UNIT

VOH

High-level output voltage

IOH = rated

VCC −0.8

V

VOL

Low-level output voltage

IOL = rated

0.5

V

VIT +

Positive-going input threshold voltage (see Note 7)

0.7 VCC

V

VIT −

Negative-going input threshold voltage (see Note 7)

0.2 VCC

V

Vhys

Hysteresis (VIT + − VIT −) (see Note 7)

0.1 VCC

0.3 VCC

V

IOZ

3-state-output high-impedance current (see Note 8)

VI = VCC or GND

±10

µA

IIL

Low-level input current (see Note 9)

VI = GND

−1

µA

IIH

High-level input current (see Note 10)

VI = VCC

1

µA

NOTES:

7. Applies for external input and bidirectional buffers with hysteresis

8. The 3-state or open-drain output must be in the high-impedance state.

9. Specifications only apply with pullup terminator turned off.

10. Specifications only apply with pulldown terminator turned off.

Not Recommended For New Designs