| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
IMX53IEC bảng dữ liệu(PDF) 4 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
IMX53IEC bảng dữ liệu(HTML) 4 Page - Freescale Semiconductor, Inc |
|
4 / 173 page ![]() i.MX53 Applications Processors for Industrial Products, Rev. 6 4 Freescale Semiconductor Introduction The i.MX53 makes use of dedicated hardware accelerators to achieve state-of-the-art multimedia performance. The use of hardware accelerators provides both high performance and low power consumption while freeing up the CPU core for other tasks. The i.MX53 incorporates the following hardware accelerators: • VPU, version 3—video processing unit • GPU3D—3D graphics processing unit, OpenGL ES 2.0, version 3, 33 Mtri/s, 200 Mpix/s, and 800 Mpix/s z-plane performance, 256 Kbyte RAM memory • GPU2D—2D graphics accelerator, OpenVG 1.1, version 1, 200 Mpix/s performance, • IPU, version 3M—image processing unit • ASRC—asynchronous sample rate converter The i.MX53 includes the following interfaces to external devices: NOTE Not all interfaces are available simultaneously, depending on I/O multiplexer configuration. • Hard disk drives: — PATA, up to U-DMA mode 5, 100 MByte/s — SATA II, 1.5 Gbps •Displays: — Five interfaces available. Total rate of all interfaces is up to 180 Mpixels/s, 24 bpp. Up to two interfaces may be active at once. — Two parallel 24-bit display ports. The primary port is up to 165 Mpix/s (for example, UXGA at 60 Hz). — LVDS serial ports: one dual channel port up to 165 Mpix/s or two independent single channel ports up to 85 MP/s (for example, WXGA at 60 Hz) each. — TV-out/VGA port up to 150 Mpix/s (for example, 1080p60). • Camera sensors: — Two parallel 20-bit camera ports. Primary up to 180-MHz peak clock frequency, secondary up to 120-MHz peak clock frequency. • Expansion cards: — Four SD/MMC card ports: three supporting 416 Mbps (8-bit i/f) and one enhanced port supporting 832 Mbps (8-bit, eMMC 4.4). •USB — High-speed (HS) USB 2.0 OTG (up to 480 Mbps), with integrated HS USB PHY — Three USB 2.0 (480 Mbps) hosts: – High-speed host with integrated on-chip high-speed PHY – Two high-speed hosts for external HS/FS transceivers through ULPI/serial, support IC-USB • Miscellaneous interfaces: — One-wire (OWIRE) port |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |