DS72011RB120FPV datasheet(117/1196 Pages) RENESAS

tên linh kiện	DS72011RB120FPV

Giải thích chi tiết về linh kiện	32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

PDF	1196 Pages

Scroll/Zoom	100%

nhà sản xuất	RENESAS [Renesas Technology Corp]

Trang chủ	http://www.renesas.com

Logo

117 / 1196 page

Section 4 Clock Pulse Generator (CPG)

Rev. 2.00 Sep. 07, 2007 Page 89 of 1164

REJ09B0321-0200

4.6.2

Note on Using Crystal Resonator

Place the crystal resonator and capacitors CL1 and CL2 as close to the XTAL and EXTAL pins as

possible. In addition, to minimize induction and thus obtain oscillation at the correct frequency,

the capacitors to be attached to the resonator must be grounded to the same ground. Do not bring

wiring patterns close to these components.

CL1

CL2

EXTAL

XTAL

Signal lines prohibited

This LSI

The values for CL1 and CL2

should be determined after

consultation with the crystal

resonator manufacturer.

Note:

Reference value

CL1 = 10 to 22 pF

CL2 = 10 to 22 pF

Figure 4.3 Note on Using Crystal Resonator

4.6.3

Note on Resonator

Since various characteristics related to the resonator are closely linked to the user's board design,

thorough evaluation is necessary on the user's part, using the resonator connection examples

shown in this section as a guide. As the parameters for the oscillation circuit will depend on the

floating capacitance of the resonator and the user board, the parameters should be determined in

consultation with the resonator manufacturer. The design must ensure that a voltage exceeding the

maximum rating is not applied to the resonator pin.

DS72011RB120FPV bảng dữ liệu(PDF) 117 Page - Renesas Technology Corp