| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
M30623SC bảng dữ liệu(PDF) 23 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M30623SC bảng dữ liệu(HTML) 23 Page - Renesas Technology Corp |
|
23 / 231 page ![]() Processor Mode Mitsubishi microcomputers M16C / 62 Group (80-pin) SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER 22 Processor mode register 0 (Note) Symbol Address When reset PM0 000416 0016 Bit name Function Bit symbol W R b7 b6 b5 b4 b3 b2 b1 b0 0 0: Single-chip mode 0 1: Inhibited 1 0: Inhibited 1 1: Inhibited b1 b0 PM03 PM01 PM00 Processor mode bit Reserved bit Software reset bit The device is reset when this bit is set to “1”. The value of this bit is “0” when read. Note: Set bit 1 of the protect register (address 000A16) to “1” when writing new values to this register. Processor mode register 1 (Note 1) Symbol Address When reset PM1 000516 00000XX02 Bit name Function Bit symbol W R b7 b6 b5 b4 b3 b2 b1 b0 Nothing is assigned. In an attempt to write to these bits, write “0”. The value, if read, turns out to be indeterminate. Reserved bit Must always be set to “0” 0 Note 1: Set bit 1 of the protect register (address 000A16) to “1” when writing new values to this register. Note 2: Be sure to set this bit to 0 except products whose RAM size and ROM size exceed 15K bytes and 192K bytes respectively. In using M30625MG/FG, a product having a RAM of more than 15K bytes and a ROM of more than 192K bytes, set this bit to 1 at the beginning of user program. Specify D000016 or a subsequent address, which becomes an internal ROM area if PM13 is set to 0 at the time reset is revoked, for the reset vector table of user program. PM17 Wait bit 0 : No wait state 1 : Wait state inserted 0 Internal reserved area expansion bit (Note 2) PM13 0: The same internal reserved area as that of M16C/60 and M16C/61 group 1: Expands the internal RAM area and internal ROM area to 23 K bytes and to 256K bytes respectively. (Note 2) Must always be set to “0” Reserved bit Must always be set to “0” Reserved bit Must always be set to “0” 00 00 0 0 0 Figure 1.8.1. Processor mode register 0 and 1 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |