| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMPR4937 bảng dữ liệu(PDF) 274 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMPR4937 bảng dữ liệu(HTML) 274 Page - Toshiba Semiconductor |
|
274 / 552 page ![]() Chapter 10 PCI Controller 10-16 3. PDMAC Status Register (PDMSTATUS) Clearing Clears any remaining status from a previous DMA transfer. 4. PDMAC Configuration register (PDMCFG) Setting Clears the Channel Reset bit (CHRST), and makes settings such as the data transfer direction (XFRDIRC), and the data transfer unit size (XFRSIZE). 5. DMA Transfer Initiation Setting the Transfer Active bit (XFRACT) of the PDMAC Configuration Register initiates DMA transfer. 6. Termination Report When the DMA data transfer terminates normally, the Normal Data Transfer Complete bit (NTCMP) of the PDMAC Status Register (PDMSTATUS) is set. An interrupt is then reported if the Normal Data Transfer Complete Interrupt Enable bit (NTCMPIE) of the PDMAC Configuration Register is set. If an error is detected during DMA transfer, the error cause is recorded in the lower 5 bits of the PDMAC Status Register and the transfer is aborted. An interrupt is then reported if the Error Detection Interrupt Enable bit (ERRIE) of the PDMAC Configuration register is set. 10.3.10.2 Chain DMA DMA Command Descriptors are 4 QWORD (32-Byte) data structures indicated in Table 10.3.6 that are placed in memory. Storing the starting memory address of another DMA Command Descriptor in the Offset 0 Chain Address Field makes it possible to configure a chain list for the DMA command Descriptor. Set “0” in the Chain Address field of the DMA Command Descriptor at the end of the chain list. When the DMA transfer specified by one DMA Command Descriptor ends, the PDMAC reads the next DMA Command Descriptor that the Chain Address field automatically points to, then continues the DMA transfer. Such continuous DMA transfer that uses multiple descriptors in a chain format is referred to as the Chain DMA mode. When a DMA Command Descriptor is placed to an address that does not extend across a 32 QWORD boundary in memory, this transfer method is more efficient since data can be read by a single G-Bus Burst Read transaction. Table 10.3.6 DMA Command Descriptors Offset Address Field Name Transfer Destination Register 0x00 Chain Address PDMAC Chain Address Register (PDMCA) 0x08 G-Bus Address PDMAC G-Bus Address Register (PDMGA) 0x10 PCI Bus Address PDMAC PCI Bus Address Register (PDMPA) 0x18 Count PDMAC Count Register (PDMCTR) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |